Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Liftgate Opener Switch Removal/Installation

Mazda CX-5 Service & Repair Manual / Body / Doors/Lids & Hood/Trunk / Liftgate Opener Switch Removal/Installation

1. Disconnect the negative battery cable..

2. Remove the following parts:

a. Liftgate upper trim.

b. Liftgate side trim.

c. Liftgate lower trim.

d. Liftgate garnish.

3. Remove the liftgate opener switch from the liftgate garnish.


4. Install in the reverse order of removal.

Liftgate Opener Switch Inspection
1. Disconnect the negative battery cable.. 2. Remove the following parts: a. Liftgate upper trim. b. Liftgate side trim. c. Liftgate lower trim. d. Liftgate garnish. e. Liftgate opener swi ...

Liftgate Opener System
Outline A liftgate opener system has been adopted in which the liftgate can be opened just by pressing the liftgate opener switch. The rear body control module (RBCM) performs liftga ...

Other materials:

Knock Sensor (Ks)
Purpose/Function Detects abnormal combustion in the cylinder as basic information for mainly determining the ignition timing. Detects abnormal combustion in the combustion chamber and inputs it to the PCM as a knocking signal. Construction Installed on the cylinder ...

Cowl Grille Removal/Installation
1. Remove the windshield wiper arm and blade.. 2. Pull the front fender molding in the direction of the arrow (1) while detaching hook A. 3. Pull the front fender molding in the direction of the arrow (2) while detaching hook B. 4. Pull the front fender molding in the direction of ...

Blind Spot Monitoring (Bsm) Control Module Removal/Installation
1. Disconnect the negative battery cable.. 2. Remove the rear combination light.. 3. Remove the rear bumper.. 4. Disconnect the connector. 5. Remove the nuts. 6. Remove the BSM control module. 7. Install in the reverse order of removal. 8. Perform the BSM radar test.. CAUTION: ...

© 2016-2022 Copyright www.mcx5.org