Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Keyless Beeper Removal/Installation

1. Disconnect the negative battery cable..

2. Remove the cowl grille..

3. Disconnect the connector.


4. Pull the keyless buzzer in the direction of the arrow (2) shown in the figure while pressing the keyless buzzer tab in the direction of the arrow (1) shown in the figure, detach the keyless buzzer tab and bracket, and then remove the keyless buzzer from the bracket.


5. Install in the reverse order of removal.

Keyless Beeper
Purpose, Function Notifies the user that the lock/unlock operation of the advanced keyless entry system is completed, and warns if the system is operated incorrectly. Construction, Ope ...

Keyless Warning Alarm
Purpose The keyless warning alarm notifies the driver that the remote transmitter cannot be verified or the steering lock cannot be released. Function When the instrument cluste ...

Other materials:

Relay And Fuse Block
Purpose Relays and fuses used by each system are grouped and housed together for smooth inspection and replacement servicing. Function Relays and fuses used by each system are grouped and housed together. Construction Installed in the engine compartment. ...

Purge Solenoid Valve Inspection
Airflow Inspection 1. Disconnect the negative battery cable.. 2. Remove the purge solenoid valve.. 3. Inspect airflow between the ports under the following conditions. Measured condition Continuity between ports A—B When voltage is not ...

Magnetic Clutch Adjustment [Full Auto Air Conditioner]
1. Measure the clearance around the entire circumference between the pressure plate and A/C compressor pulley using a thickness gauge. 2. Verify the clearance. If not within the specification, remove the pressure plate and adjust the clearance by changing the shim (0.2 mm {0.008 i ...

© 2016-2022 Copyright www.mcx5.org