Purpose
KEY warning light (red)
The KEY warning indicator light (red) notifies the user that the engine cannot be started, the remote transmitter is outside of the vehicle, or that there is a malfunction in the system.
KEY indicator light (green)
The KEY indicator light (green) notifies the user that the engine starting conditions have been met or that the remote transmitter battery voltage is depleted.
Function
KEY warning indicator light (red)
When a malfunction is detected in the system, the KEY warning indicator light (red) illuminates..
The KEY warning indicator light (red) flashes if the engine cannot be started and when the ignition is switched to ACC or ON (engine off or on) and the transmitter is taken outside of the vehicle..
KEY indicator light (green)
When the engine-starting conditions have been met, the KEY indicator light (green) illuminates..
If the remote transmitter battery voltage is depleted, the KEY indicator light (green) flashes..
Construction
The KEY warning indicator light (red)/KEY indicator light (green) are built into the instrument cluster.
Operation
Warning indicator light (red)
If a malfunction is detected in the system, the engine cannot be started, or the remote transmitter is outside of the vehicle, the start stop unit sends a warning request signal via CAN transmission to the instrument cluster.
KEY indicator light (green)
If the engine starting conditions have been met, the start stop unit sends a KEY indicator light (green) illumination request signal via CAN transmission to the instrument cluster.
If the remote transmitter battery voltage has been depleted, the start stop unit sends a battery voltage depletion display request signal via CAN transmission to the instrument cluster.
Fail-safe
Function not equipped.
Power Window Main Switch
Purpose
Remote control of door glass open/close and power outer mirror adjustment
are possible with occupant seated in the cabin.
Function
Power window main switch
Manual
When the power window main switch is operated for manual open/close operation,
it sends ...
ABS Control
Outline
ABS control occurs when wheel slip is determined by the DSC CM (based on
the four ABS wheel-speed sensors). Then, the DSC HU inlet and outlet solenoid
valves are operated and brake fluid pressure is controlled accordingly to prevent
wheel lock-up.
Feature
Use of ...
Front Door Checker Removal/Installation
CAUTION:
When the front door checker securing bolts are removed, the front door may
open until it contacts the front fender panel causing the front door and the
front fender panel to be damaged. Before removing the front door, overlap and
adhere the protective tape to the position s ...