Mazda CX-5 Service & Repair Manual: Intake Air System
Purpose, Outline
-
A vacuum pump has been adopted which supplies stable vacuum to the power brake unit.
Structural View
System Diagram
Vacuum Hose Routing Diagram
Structure
-
The intake air system consists of the following parts:
|
Part name |
Reference |
|
Fresh-air duct |
(See FRESH-AIR DUCT [SKYACTIV-G 2.0].) |
|
Resonance chamber |
(See RESONANCE CHAMBER [SKYACTIV-G 2.0].) |
|
Air cleaner |
(See AIR CLEANER [SKYACTIV-G 2.0].) |
|
Throttle body |
(See THROTTLE BODY [SKYACTIV-G 2.0].) |
|
Vacuum pump |
(See VACUUM PUMP [SKYACTIV-G 2.0].) |
|
Intake manifold |
(See INTAKE MANIFOLD [SKYACTIV-G 2.0].) |
|
Accelerator pedal |
(See ACCELERATOR PEDAL, KICKDOWN SWITCH [SKYACTIV-G 2.0].) |
Intake Air System Removal/Installation
WARNING:
A hot engine and intake air system can cause severe burns. Turn off the engine
and wait until they are cool before removing the intake air system.
1. Disconnect the negative ...
Intake Air Temperature (Iat) Sensor Inspection
IAT Sensor No.1
Resistance inspection
NOTE:
Because the IAT sensor No.1 is integrated in the MAF sensor, replacing the
IAT sensor No.1 includes replacement of the MAF sensor/IAT sensor No ...
Other materials:
Hood
WARNING
Always check that the hood is closed and securely locked:
A hood that is not closed and securely locked is dangerous as it could fly open
while the vehicle is moving and block the driver's vision which could result in
a serious accident.
Opening the Hood
1. With the vehicle parke ...
Declaration of Conformity
Declaration of Conformity
Keyless Entry System/Immobilizer System
Blind Spot Monitoring (BSM) System
Radiation Hazard
This BSM (blind spot monitoring) device emits intentional electromagnetic radiation
in the 24 GHz to 25 GHz frequency range. The total radiated average power over the
entir ...
Relay And Fuse Block Disassembly/Assembly
1. Insert a tape-wrapped flathead screwdriver into the service hole in the position
shown in the figure.
2. Move the flathead screwdriver in the direction of the arrow (1) shown in the
figure, pull up relay and fuse block No.1 in the direction of the arrow (2) shown
in the figure, and de ...
