Mazda CX-5 Service & Repair Manual: Instrument Cluster Operation Record
Purpose
-
The instrument cluster operation record stores the record of the illumination or flashing of the warning light.
Function
-
The operation record is stored by the instrument cluster and displayed using the Mazda Modular Diagnostic System (M-MDS).
-
The instrument cluster stores the following when any of the warning lights illuminates or flashes.
-
Time and date
-
Control module which sent warning light illumination/flash request
-
Battery voltage
Construction
-
Based on the stored record, the instrument cluster displays the following operation record on the M-MDS screen.
Operation
-
When the instrument cluster receives a CAN signal or a warning light illumination/flash request signal sent from each switch, it controls the warning light to illuminate/flash and stores the operation record at the same time.
Fail-safe
-
Function not equipped.
Instrument Cluster Inspection
Speedometer inspection
Using a speedometer tester
1. Adjust the tire pressure to the specification.
2. Using a speedometer tester, verify that the tester reading is as indicated
in the following ...
Instrument Cluster Operation Record
1. Connect the M-MDS to the DLC-2.
2. After vehicle identification, select the following from the M-MDS initial
screen.
“Operational Record”
3. Then, select the following from th ...
Other materials:
Starting System [Skyactiv G 2.0]
Outline
A coaxial reduction type starter has been adopted.
Structural View
Structure
Consists of the following parts:
Starter
(See STARTER [SKYACTIV-G 2.0].)
Starter relay
(See STARTER REL ...
Room Light Control System
Outline
The room light control system changes the illumination condition and illumination
level of the interior lights (door position) according to whether the doors
are opened/closed and locked/unlocked.
The room light control system is controlled by the rear body control modul ...
Wheel Balance Adjustment (Aluminum Alloy Wheel)
CAUTION:
Adjust the outer wheel balance first, then the inner wheel balance.
Be careful not to scratch the wheels.
Adhesive-type Balance Weight (Outer)
1. Remove the old balance weight from the wheel.
2. Remove the double-sided adhesive tape remaining on the wheel, then ...
