Mazda CX-5 Owners Manual: Immobilizer System
The immobilizer system allows the engine to start only with a key the system recognizes.
If someone attempts to start the engine with an unrecognized key, the engine will not start, thereby helping to prevent the theft of your vehicle.
If you have a problem with the immobilizer system or the key, consult an Authorized Mazda Dealer.
CAUTION
● Radio equipment like this is governed by laws.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
● To avoid damage to the key, do not:
● Drop the key.
● Get the key wet.
● Expose the key to any kind of magnetic field.
● Expose the key to high temperatures on places such as the dashboard or hood, under direct sunlight.
● If the engine does not start with the correct key, and the security indicator light keeps illuminating or flashing, the system may have a malfunction. Consult an Authorized Mazda Dealer.
NOTE
• The keys carry a unique electronic code.
For this reason, and to assure your safety, obtaining a replacement key requires some waiting time. They are only available through an Authorized Mazda Dealer.
• Always keep a spare key in case one is lost.
If a key is lost, consult an Authorized Mazda Dealer as soon as possible.
• If you lose a key, an Authorized Mazda Dealer will reset the electronic codes of your remaining keys and immobilizer system. Bring all the remaining keys to an Authorized Mazda Dealer to reset.
Starting the vehicle with a key that has not been reset is not possible.
Operation
NOTE
• The engine may not start and security indicator light may illuminate or flash if the key is placed in an area where it is difficult for the system to detect the signal, such as on the dashboard or in the glove compartment. Move the key to a location within the signal range, switch the ignition off, and then restart the engine.
• Signals from a TVor radio station, or from a transceiver or mobile telephone could interfere with your immobilizer system. If you are using the proper key and the engine fails to start, check the security indicator light.
Arming
The system is armed when the push button start is pressed from ON to off.
The security indicator light in the instrument cluster flashes every 2 seconds until the system is disarmed.
Refer to Warning/Indicator Lights on .
Disarming
The system is disarmed when the ignition is switched ON with the correct programmed key. The security indicator light illuminates for about 3 seconds and then turns off. If the engine does not start with the correct key, and the security indicator light remains illuminated or flashing, try the following: Make sure the key is within the operational range for signal transmission.
Switch the ignition off, and then restart the engine. If the engine does not start after 3 or more tries, contact an Authorized Mazda Dealer.
NOTE
• If the security indicator light flashes continuously while you are driving, do not shut off the engine. Go to an Authorized Mazda Dealer and have it checked. If the engine is shut off while the indicator light is flashing, you will not be able to restart it.
• Because the electronic codes are reset when the immobilizer system is repaired, the keys are needed. Make sure to bring all the keys to an Authorized Mazda Dealer so that they can be programmed.
Modification and Add-On Equipment
Mazda cannot guarantee the immobilizer and the theft-deterrent systems' operation
if the system has been modified or if any add-on equipment has been installed.
CAUTION
To avoid damage to your ...
Theft-Deterrent System
If the theft deterrent system detects an inappropriate entry into the vehicle,
which could result in the vehicle or its contents being stolen, the alarm alerts
the surrounding area of an abnormali ...
Other materials:
Operating Tips
Operate the climate control system with the engine running.
• To prevent the battery from being discharged,
do not leave the fan control dial on for a long period of time with the ignition
switched ON when the engine is not running.
• Clear all obstructions such as leaves, snow
and ice f ...
Fully Automatic Type
Climate control information is displayed on the display.
Control Switches
AUTO switch
By pressing the AUTO switch the following functions will be automatically controlled
in accordance with the selected set temperature:
• Airflow temperature
• Amount of airflow
• Selection of airflow ...
Oil Seal (Control Valve Body) Replacement [Fw6 A EL, Fw6 Ax EL]
1. Disconnect the negative battery cable..
2. Remove the air cleaner component..
3. Disconnect the control valve body connector.
CAUTION:
Make sure that your hand does not touch the terminal as the connector terminal
could be damaged.
Water or foreign objects entering th ...
