Mazda CX-5 Service & Repair Manual: Ignition
- Electronic Spark Advance Control [Skyactiv G 2.0]
- Forced Ignition On
- Fuel Distributor [Skyactiv G 2.0]
- Igniter Removal/Installation
- Ignition Coil Inspection [Skyactiv G 2.0]
- Ignition Coil [Skyactiv G 2.0]
- Ignition Coil/Ion Sensor Removal/Installation [Skyactiv G 2.0]
- Ignition System [Skyactiv G 2.0]
- Spark Plug Inspection [Skyactiv G 2.0]
- Spark Plug Removal/Installation [Skyactiv G 2.0]
- Spark Plug [Skyactiv G 2.0]
Power Supply Switching
Outline
By pressing the push button start, switching of the power supply is performed.
Function
The start stop unit switches the power supply according to the vehicle conditions
...
Electronic Spark Advance Control [Skyactiv G 2.0]
Outline
Controls ignition to optimum timing according to engine operation conditions.
Serviceability has been improved by eliminating the necessity of ignition
timing adjustment.
...
Other materials:
Intermediate Shaft Removal/Installation
WARNING:
The steering column (EPS motor) temperature increases directly after continuous
turning of the steering mechanism which could cause burns if it is touched.
Before performing any servicing, verify that the steering column has cooled
off.
1. Rotate the steering wheel un ...
Cylinder Head Gasket
Purpose, Function
The cylinder head gasket is installed between the cylinder head and cylinder
block to prevent leakage of air-fuel mixture, combustion gas, engine oil, and
engine coolant.
Construction
A four-layer type metal gasket has been adopted for the cylinder head ga ...
Awd Control Module Removal/Installation
CAUTION:
When performing configuration, it is necessary to read the coupling component
calibration data from the AWD control module before replacing it. Connect the
M-MDS to the vehicle and perform vehicle identification before removing the
AWD control module. The coupling component ...
