Mazda CX-5 Service & Repair Manual: Fuel Tank Pressure Sensor
Purpose/Function
-
The fuel tank pressure sensor detects the fuel tank pressure.
-
Fuel tank pressure sensor is only used for OBD.
Construction
-
The fuel tank pressure sensor is equipped to the charcoal canister.
-
A piezoelectric-type sensor has been adopted.
Operation
-
Inputs the pressure in the fuel tank to the PCM.
Fuel tank pressure sensor characteristic
Fail-safe
-
Function not equipped.
Fuel Tank Pressure Sensor Inspection
Voltage Inspection
NOTE:
The fuel tank pressure sensor cannot be removed as a single unit. When replacing
the fuel tank pressure sensor, replace it together with the charcoal canister
a ...
Intake
...
Other materials:
Oil Seal (Differential) Replacement [Fw6 A EL, Fw6 Ax EL]
Transaxle Case Side
1. Remove the front under cover No.2..
2. Drain the ATF..
3. Disconnect the drive shaft (LH) from the transaxle..
CAUTION:
The oil seal is easily damaged by the sharp edges of the drive shaft splines.
Do not let the splines contact the oil seal.
4. Remove ...
Rear Coil Spring Removal/Installation
WARNING:
Be careful not to allow the coil spring to fly off when removing/installing
the coil spring. Otherwise, the coil spring could fly off and cause serious
injury or death, or damage to the vehicle.
1. When working on the left side of the vehicle, disconnect the auto lev ...
Theft-Deterrent System
If the theft deterrent system detects an inappropriate entry into the vehicle,
which could result in the vehicle or its contents being stolen, the alarm alerts
the surrounding area of an abnormality by sounding the horn and flashing the hazard
warning lights.
The system will not function unle ...
