Mazda CX-5 Service & Repair Manual: Fuel Pump Control

Mazda CX-5 Service & Repair Manual / Engine / Fuel / Fuel Pump Control

Outline

By switching the fuel pump discharge amount, reduced power consumption and improved fuel economy have been realized.
The PCM determines the optimum fuel pump drive force according to the engine operation conditions, and sends the fuel pump drive signal to the fuel pump control module.

Block Diagram

Operation

Fuel pump relay

The PCM switches the fuel pump relay on/off according to the engine operation conditions.


Relay ON/OFF	Control conditions
ON	When any of the following conditions is met: When ignition is switched ON (for approx. 1 s) During engine cranking While engine is running
OFF	When engine is stopped

Fuel pump control module

The PCM determines the fuel pump discharge amount according to the engine operation conditions, and controls the output duty ratio to the fuel pump control module according to the discharge amount.


Output duty ratio	Control conditions
95%	When any of the following conditions is met: At engine start Fuel pump control module malfunction (if request voltage is unobtainable)
10—90%	Feedback value from fuel pressure sensor is the specified value or more (Determined that high pressure fuel pump compression is high.) Except for control conditions with output duty ratio of 5% or 95%
5%	When engine is stopped

Fuel pump operation circuit diagram

Fuel Pump Control Module

Purpose, Function Controls the voltage applied to the fuel pump for reducing fuel pump load and improving fuel economy. Controls the voltage applied to the fuel pump based on the con ...

Fuel Pump Unit Disassembly/Assembly

WARNING: Fuel is very flammable liquid. If fuel spills or leaks from the pressurized fuel system, it will cause serious injury or death and facility breakage. Fuel can also irritate skin ...

Other materials:

Exhaust Gas Purification System
Purpose, Outline Purifies contaminants (HC, CO, NOx) in the exhaust gas by utilizing the chemical reactions of the three-way catalytic converter. System Diagram Structure The exhaust gas purification system consists of the following parts: Par ...

Anticorrosion, Sound Insulation, And Vibration Insulation
Body Sealing Apply body sealer where necessary. For locations where application of body sealer is difficult after installation, apply it before installation. Application of Undercoating Apply an undercoat to the required location of the body. Application ...

Throttle Position (TP) Sensor
Purpose/Function Detects the throttle valve opening/closing condition, which operates in accordance with the accelerator pedal operation, as basic information for mainly determining the fuel injection amount. Detects the throttle valve opening/closing condition, which operates i ...