Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Fuel Gauge Sender Unit Removal/Installation [Awd]

Mazda CX-5 Service & Repair Manual / Engine / Cooling / Fuel Gauge Sender Unit Removal/Installation [Awd]

WARNING:

CAUTION:

Fuel Gauge Sender Unit (main)

NOTE:

Fuel Gauge Sender Unit (sub)

1. Perform the "Fuel Line Safety Procedure" referring to the "BEFORE REPAIR PROCEDURE"..

2. If the fuel gauge level indicates 3/4 or more, refer to the "FUEL DRAINING PROCEDURE" and drain the fuel..

3. Remove the following parts:

a. Rear seat cushion (6:4 split type).

b. Rear seat under installation bolt (4:2:4 split type).

c. Rear scuff plate.

4. Partially peel back the floor covering.


5. Remove the screws.


6. Remove the service hole cover.

7. Disconnect the connector.


8. Remove the screws.


9. Remove the fuel gauge sender unit (sub).


10. Install in the reverse order of removal.

11. Perform the fuel leakage inspection referring to [AFTER SERVICE PRECAUTION]..

Fuel Gauge Sender Unit Removal/Installation [2 Wd]
WARNING: Always keep sparks and flames away from fuel when servicing the fuel system. Fuel can be easily ignited which could cause serious injury or death, and damage to equipment. ...

Low Engine Coolant Temperature Indicator Light (Blue)/High Engine Coolant Temperature Warning Light (Red)
Purpose Low engine coolant temperature indicator light (blue) The low engine coolant temperature indicator light (blue) notifies the driver that the engine coolant temperature is low and va ...

Other materials:

High Pressure Fuel Pump
Purpose, Function Applies pressure to fuel sent from the fuel pump equipped on the fuel tank, and then pumps it to the fuel delivery pipe. Fuel is sectioned and pumped by the up and down movement of the piston caused by the rotation of the cam installed to the rear end of the ex ...

Cooling Fan Motor Removal/Installation
WARNING: Never remove the cooling system cap or loosen the radiator drain plug while the engine is running, or when the engine and radiator are hot. Scalding engine coolant and steam may shoot out and cause serious injury. It may also damage the engine and cooling system. Tu ...

Intermediate Shaft Removal/Installation
WARNING: The steering column (EPS motor) temperature increases directly after continuous turning of the steering mechanism which could cause burns if it is touched. Before performing any servicing, verify that the steering column has cooled off. 1. Rotate the steering wheel un ...

© 2016-2022 Copyright www.mcx5.org