Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Fuel Filler Lid Removal/Installation

Mazda CX-5 Service & Repair Manual / Engine / Fuel / Fuel Filler Lid Removal/Installation

1. Remove bolts.


2. Remove the fuel-filler lid.

3. Install in the reverse order of removal.

4. Adjust the fuel-filler lid..

Fuel Filler Lid Opener Cable Removal/Installation
1. Disconnect the negative battery cable.. 2. Remove the following parts: a. Front scuff plate (LH). b. Front seat (LH). c. Rear scuff plate. d. B-pillar lower trim (LH). e. Rear seat (4:2 ...

Fuel Filler Pipe Removal/Installation
WARNING: Fuel is very flammable liquid. If fuel spills or leaks from the pressurized fuel system, it will cause serious injury or death and facility breakage. Fuel can also irritate skin ...

Other materials:

Oil Cooler
Purpose, Function The oil cooler routes engine oil and engine coolant through the interior and disperses the engine oil heat using the engine coolant. As a result, the oil temperature is maintained properly to reduce the engine oil deterioration. Construction A 9-layered ty ...

Pressure Sensor Removal/Installation [Two Step Deployment Control System]
WARNING: Handling the pressure sensor improperly can accidentally operate (deploy) the air bag module, which may seriously injure you. Read the air bag system service warnings and cautions before handling the pressure sensor.. 1. Switch the ignition to off. 2. Disconnect the ne ...

Rear Drive Shaft Disassembly/Assembly
1. Disassemble in the order indicated in the table. 2. Assemble in the reverse order of disassembly. 1 Boot band (differential side) (See Boot Band (Differential Side) Disassembly Note.) (See Boot Band (Differential Side) Assembly Note.) 2 ...

© 2016-2022 Copyright www.mcx5.org