Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Front Seat Side Cover Removal/Installation

Mazda CX-5 Service & Repair Manual / Body / Seats / Front Seat Side Cover Removal/Installation

WARNING:

CAUTION:

Front Door Side

Driver-side (With Power Seat System)

1. Switch the ignition off (LOCK).

2. Disconnect the negative battery cable and wait for 1 min

..

3. Pull the power seat switch knob in the direction of the arrow (1) shown in the figure, and remove it while disengaging tabs A and B.


4. Pull the power seat switch knob in the direction of the arrow (2) shown in the figure, and remove it while disengaging tabs C and D.

5. Remove clip E from the front seat cushion frame.


6. Pull up the front seat side cover in the direction of the arrow (3) shown in the figure and set hook F aside.

7. Pull the front seat side cover in the direction of the arrow (4) shown in the figure and disengage the tabs G and H, and the pin.


8. Pull the front seat side cover in the direction of the arrow (5) shown in the figure and set hook I aside.


9. Pull the front seat side cover in the direction of the arrow (6) shown in the figure and set hook J aside.

10. Disconnect the power seat switch connector.


11. Set the wiring harness aside from hooks K and L, and remove the front seat side cover in the direction of the arrow (7) shown in the figure.

12. Remove the power seat switch..

13. Install in the reverse order of removal.

Driver-side (Without power seat system)

CAUTION:

1. Switch the ignition off (LOCK).

2. Disconnect the negative battery cable and wait for 1 min

..

3. Move the flathead screwdriver wrapped in protective tape in the direction of the arrow (1) shown in the figure and disengage tab A.


4. Move the flathead screwdriver wrapped in protective tape in the direction of the arrow (2) shown in the figure and disengage tab B.


5. Remove the recliner lever knob in the direction of the arrow (3) shown in the figure.


6. Affix the protective tape to the position shown in the figure.


7. Using a wood slab, tap the end of the lifter lever knob with the plastic hammer and remove it in the direction of the arrow (4).


8. Remove clip C from the front seat cushion frame.


9. Pull up the front seat side cover in the direction of the arrow (5) shown in the figure and set hook D aside.

10. Pull the front seat side cover in the direction of the arrow (6) shown in the figure and disengage the tabs E and F, and the pin.


11. Pull the front seat side cover in the direction of the arrow (7) shown in the figure and set hook H aside.


12. Pull the front seat side cover in the direction of the arrow (8) shown in the figure and set hook I aside.

13. Remove the front seat side cover.

14. Install in the reverse order of removal.

Passenger-side

CAUTION:

1. Switch the ignition off (LOCK).

2. Disconnect the negative battery cable and wait for 1 min

..

3. Using a tape-wrapped flathead screwdriver, detach tab A in the direction of arrows (1) shown in the figure.


4. Using a tape-wrapped flathead screwdriver, detach tab B in the direction of arrows (2) shown in the figure.


5. Remove the recliner lever knob in the direction of the arrow (3) shown in the figure.


6. Remove clip C from the front seat cushion frame.


7. Pull up the front seat side cover in the direction of the arrow (4) shown in the figure and set hook D aside.

8. Pull the front seat side cover in the direction of the arrow (5) shown in the figure and disengage the tabs E and F, and the pin.


9. Pull the front seat side cover in the direction of the arrow (6) shown in the figure and set hook G aside.


10. Pull the front seat side cover in the direction of the arrow (7) shown in the figure and set hook H aside.

11. Remove the front seat side cover

12. Install in the reverse order of removal.

Rear Console Side

1. Switch the ignition off (LOCK).

2. Disconnect the negative battery cable and wait for 1 min

..

3. Remove the front seat..

4. Remove the screw A.


5. Pull up the front seat side cover in the direction of the arrow (1) shown in the figure and set hook B aside.

6. Pull the front seat side cover in the direction of the arrow (2) shown in the figure and disengage the tabs C and D, and the pin.


7. Pull the front seat side cover in the direction of the arrow (3) shown in the figure and set hook E aside.


8. Pull the front seat side cover in the direction of the arrow (4) shown in the figure and set hook F aside.

9. Remove the front seat side cover.

10. Install in the reverse order of removal.

Front Seat Removal/Installation
WARNING: Handling a side air bag improperly can accidentally operate (deploy) the air bag, which may seriously injure you. Read the service warnings/cautions in the Workshop Manual befor ...

Front Tilt Motor Inspection
WARNING: Handling a side air bag improperly can accidentally operate (deploy) the air bag, which may seriously injure you. Read the service warnings/cautions in the Workshop Manual befor ...

Other materials:

Low Engine Coolant Temperature Indicator Light (Blue)/High Engine Coolant Temperature Warning Light (Red)
Purpose Low engine coolant temperature indicator light (blue) The low engine coolant temperature indicator light (blue) notifies the driver that the engine coolant temperature is low and vaporization of the fuel is difficult. High engine coolant temperature warning light (red) ...

Warning/Indicator Lights
Warning (Display Indication) Message information such as system operations or malfunctions is indicated in the display. Check the vehicle condition or have the vehicle inspected at an Authorized Mazda Dealer according to the indication. Brake System Warning Light This warning has th ...

Back Up Light Switch Inspection
1. Disconnect the negative battery cable.. 2. Remove the front under cover No.2.. 3. Remove the back-up light switch.. 4. Verify that the continuity between the back-up light switch terminals is as indicated in the table. If not as indicated in the table, replace the back-up ...

© 2016-2022 Copyright www.mcx5.org