Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Front Fog Lights Indicator Light

Mazda CX-5 Service & Repair Manual / Body / Lighting & Horn / Exterior / Front Fog Lights Indicator Light

Purpose

Function

Construction

Operation

1. With the light switch in the TNS, HEAD, or HI position, a front fog light switch signal is input to the start stop unit when the front fog light switch is operated to the on position.

2. The start stop unit sends the front fog light switch signal to the front body control module (FBCM).

3. The front body control module (FBCM) sends the front fog light switch signal to the instrument cluster as a front fog light illumination signal.

4. The instrument cluster illuminates the front fog light indicator light when it receives the front fog light illumination signal.


Fail-safe

Front Fog Light Removal/Installation
1. Disconnect the negative battery cable.. 2. Remove the screws and bolt. 3. Pull up the front under cover No.1 and remove the mudguard screw shown in the figure. 4. Disconnect the con ...

Headlight Aiming
NOTE: Perform headlight aiming if any of the following work is performed. Front combination light replacement Work that can affect vehicle height such as suspension rep ...

Other materials:

Airflow Mode Actuator Removal/Installation [Full Auto Air Conditioner]
1. Disconnect the negative battery cable.. 2. Remove the following parts: a. Dashboard under cover. b. Glove compartment. 3. Disconnect the airflow mode actuator connector. 4. Remove the screw. 5. Remove the airflow mode actuator. 6. Remove the airflow mode main link. 7. Remo ...

Bsm Indicator Light Does Not Flash While Under Bsm Indicator Light Flashing Conditions (With Combination Switch Operation (Turn Signal Switch)) [Blind Spot Monitoring (Bsm)]
Description BSM indicator light does not flash while under BSM indicator light-flashing conditions (with combination switch operation (turn signal switch)) The BSM indicator light does not flash or illuminate continuously, but the cond ...

Generator [Skyactiv G 2.0]
Purpose, Function The generator operates by obtaining drive force from the engine via the drive belt and generates the required electricity for electronic devices. Construction The generator is installed on the engine left front side. Output control is perfor ...

© 2016-2024 Copyright www.mcx5.org