Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Front Fender Junction Removal [Panel Replacement]

Mazda CX-5 Service & Repair Manual / Electrical / Fuses & Junction Blocks / Front Fender Junction Removal [Panel Replacement]

Symbol Mark


Removal Procedure

1. Drill the 3 locations shown in the figure.


2. Remove the front fender junction.

Front Fender Junction Installation [Panel Replacement]
Symbol Mark Installation Procedure 1. When installing new parts, measure and adjust the body as necessary to conform with standard dimensions. 2. Drill holes for the plug welding before inst ...

Fuel Injector Relay [Skyactiv G 2.0]
Purpose, Function Supplies power to the PCM for the fuel injector and spill valve control solenoid valve operation. Construction The fuel injector relay is installed in the rela ...

Other materials:

Wheel Hub Component Removal/Installation [2 Wd]
CAUTION: Performing the following procedures without first removing the ABS wheel-speed sensor may possibly cause an open circuit in the wiring harness if it is pulled by mistake. Before performing the following procedures, disconnect the ABS wheel-speed sensor connector (body sid ...

Body Panel
Outline The multi-load path and triple H-shaped structure of distributing the power absorbed at the collision were used for the body shell. A ring structure has been adopted for the triple H structure, realizing top-level crash safety performance. Crushable structure fro ...

Vanity Mirror Illumination Inspection
1. Disconnect the negative battery cable.. 2. Remove the sunvisor.. 3. Verify that the continuity between the vanity mirror illumination terminals is as indicated in the table. If not as indicated in the table, replace the sunvisor. ...

© 2016-2022 Copyright www.mcx5.org