Purpose
The evaporator cools the passing air.
Function
The evaporator vaporizes the atomized refrigerant flowing internally, and the air passing through the evaporator is cooled by the release of latent heat. The moisture in the air is condensed at this time and dehumidified air is blown into the cabin.
Construction
The evaporator consists of the tube which passes refrigerant, and the heat radiation fin.
The cooling medium flow pattern shown in the figure has been adopted for the evaporator.
Operation
The atomized refrigerant sent from the expansion valve is captured by heat from the outside. As a result, the evaporator is cooled.
The air blown by the blower motor is cooled by heat exchange when it passes the heat radiation fin of the heater core.
Fail-safe
Function not equipped.
Headlight Aiming
NOTE:
Perform headlight aiming if any of the following work is performed.
Front combination light replacement
Work that can affect vehicle height such as suspension replacement or
removal/installation.
1. Empty the vehicle by having all occupants leav ...
Steering Switch Inspection
Without Bluetooth system
WARNING:
Handling the driver-side air bag module improperly can accidentally operate
(deploy) the air bag module, which may seriously injure you. Read the service
warnings and cautions before handling the air bag module..
1. Switch the ignition OFF (LOCK ...
Seat Belt
Outline (Standard Deployment Control System)
Three-point front seat belts with the following functions for front seat
passengers adopted.
ELR (Emergency Locking Retractor: emergency locking mechanism)
Load limiter
Pre-tensioner seat belt.
T ...