Mazda CX-5 Service & Repair Manual: Evaporative Emission (Evap) Control System
Purpose, Outline
-
Prevents release of evaporative gas into the atmosphere.
-
The intake manifold vacuum introduces evaporative gas to the intake manifold via the charcoal canister and the purge solenoid valve.
System Diagram
U.S.A. and CANADA
Except U.S.A. and CANADA
Structure
-
The evaporative emission control system consists of the following parts:
|
Part name |
Reference |
|
Purge solenoid valve |
(See PURGE SOLENOID VALVE [SKYACTIV-G 2.0].) |
|
Catch tank |
(See CATCH TANK [SKYACTIV-G 2.0].) |
|
Charcoal canister |
(See CHARCOAL CANISTER [SKYACTIV-G 2.0].) |
|
Pressure control valve |
(See PRESSURE CONTROL VALVE [SKYACTIV-G 2.0].) |
|
Fuel shut-off valve |
(See FUEL SHUT-OFF VALVE [SKYACTIV-G 2.0].) |
|
Rollover valve |
(See ROLLOVER VALVE [SKYACTIV-G 2.0].) |
|
Fuel-filler cap |
(See FUEL-FILLER CAP [SKYACTIV-G 2.0].) |
|
CV solenoid valve |
(See CANISTER VENT (CV) SOLENOID VALVE [SKYACTIV-G 2.0].) |
Except U.S.A. and CANADA
|
Part name |
Reference |
|
Purge solenoid valve |
(See PURGE SOLENOID VALVE [SKYACTIV-G 2.0].) |
|
Catch tank |
(See CATCH TANK [SKYACTIV-G 2.0].) |
|
Charcoal canister |
(See CHARCOAL CANISTER [SKYACTIV-G 2.0].) |
|
Check valve |
(See CHECK VALVE [SKYACTIV-G 2.0].) |
|
Rollover valve |
(See ROLLOVER VALVE [SKYACTIV-G 2.0].) |
|
Fuel-filler cap |
(See FUEL-FILLER CAP [SKYACTIV-G 2.0].) |
Engine Control System
Outline
L-jetronic*1 and D-jetronic*2 type detectors have been combined for intake
air amount detection, improving the accuracy of the intake air amount measurement.
MAF sensor ...
Fuel Injection Control System
Outline
Performs optimum fuel injection according to engine operation conditions.
The PCM determines the engine operation conditions based on the signals from
each input device and d ...
Other materials:
Heated Oxygen Sensor (HO2 S) Inspection
HO2S Inspection
1. Connect the M-MDS to the DLC?2.
2. Switch the ignition ON (engine on).
3. Warm up the engine to normal operating temperature.
4. Access the following PIDs using the M-MDS..
VSS (Vehicle speed)
RPM (Engine speed)
O2S12 (HO2S output voltage)
5. D ...
Up Switch [Fw6 A EL, Fw6 Ax EL]
Purpose/Function
The up switch detects the shift up operation of the selector lever.
The up switch signal is sent to the TCM via CAN and is used for manual shift
control and engine-transaxle integration control.
Construction
The up switch is installed to the selector l ...
Differential Oil Temperature Sensor Inspection
WARNING:
Hot differential oil may cause severe burns. Do not perform maintenance while
differential oil is hot.
1. Disconnect the negative battery cable.
2. Disconnect the differential oil temperature sensor connector and remove the
differential oil temperature sensor.
3. Wrap ...
