Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Engine Oil Replacement

WARNING:

CAUTION:

1. Position the vehicle on level ground.

2. Remove the oil filler cap.

3. Remove the service hole cover (installed to front under cover No.2) used to drain the engine oil.


4. Remove the oil pan drain plug.

5. Drain the engine oil into a container.

6. Install the oil pan drain plug with a new gasket.

NOTE:

7. Refill with the following type and amount of engine oil. Engine oil specification


Item

U.S.A. and CANADA

Except U.S.A. and CANADA

Engine oil grade



ILSAC GF-5

API SM or ILSAC

Engine oil viscosity

0W-20

5W-30


8. Install the oil filler cap.

9. Start the engine and confirm that there is no oil leakage.

10. Inspect the oil level..

11. Install the service hole cover.

Engine Oil Pressure Warning Light
Purpose The engine oil pressure warning light warns the driver that the engine oil level is insufficient. Function When the instrument cluster receives the engine oil pressure w ...

Engine Oil Solenoid Valve Inspection
Engine Oil Solenoid Valve Operation Inspection 1. Remove the engine oil solenoid valve.. 2. Verify that the battery is fully charged. 3. Connect the battery to the engine oil solenoid valve conne ...

Other materials:

Wheel Balance Adjustment (Aluminum Alloy Wheel)
CAUTION: Adjust the outer wheel balance first, then the inner wheel balance. Be careful not to scratch the wheels. Adhesive-type Balance Weight (Outer) 1. Remove the old balance weight from the wheel. 2. Remove the double-sided adhesive tape remaining on the wheel, then ...

Oil Pressure Switch Removal/Installation [Fw6 A EL, Fw6 Ax EL]
WARNING: A hot transaxle and ATF can cause severe burns. Turn off the engine and wait until they are cool. Always wear protective eye wear when using the air compressor. If the air compressor is used, any particles of dirt or soiling could spatter and get into the eyes. ...

Air Fuel Ratio (A/F) Sensor Heater Control [Skyactiv G 2.0]
Outline Based on the control of the A/F sensor heater, a stabilized oxygen concentration is detected even at low exhaust temperatures, and feedback control of fuel injection even at cold engine start is made possible for improved cold temperature exhaust emission performance. ...

© 2016-2022 Copyright www.mcx5.org