Purpose
The engine oil pressure warning light warns the driver that the engine oil level is insufficient.
Function
When the instrument cluster receives the engine oil pressure warning light request signal sent from the PCM via the CAN signal, it illuminates the engine oil pressure warning light.
Construction
The instrument cluster controls illumination on/off of the engine oil pressure warning light using the instrument cluster microcomputer based on the engine oil pressure warning light request signal from the PCM.
The engine oil pressure warning light is set in the instrument cluster.
Operation
1. The instrument cluster receives (1) the engine oil pressure warning light request signal from the PCM.
2. The instrument cluster microcomputer turns the transistor on (2) based on the engine oil pressure warning light request signal.
3. When the transistor turns on, a ground circuit with the engine oil pressure warning light is established and the engine oil pressure warning light illuminates (3).
Fail-safe
Function not equipped.
A/C Cut Off Control [Skyactiv G 2.0]
Outline
Controls the A/C operation by switching the A/C relay ON/OFF at the optimal
timing according to engine operation conditions. Acceleration performance and
A/C compressor reliability have been improved by controlling the A/C operation.
Block Diagram
Operation
The ...
Rear Stabilizer Removal/Installation [2 Wd]
WARNING:
Verify that the rear crossmember is securely supported by a jack. If the
rear crossmember falls off, it can cause serious injury or death, and damage
to the vehicle.
CAUTION:
Performing the following procedures without first removing the rear ABS wheel-spee ...
High Pressure Fuel Pump Removal/Installation
WARNING:
Fuel is very flammable liquid. If fuel spills or leaks from the pressurized
fuel system, it will cause serious injury or death and facility breakage. Fuel
can also irritate skin and eyes. To prevent this, always complete the “Fuel
Line Safety Procedure”, while referring ...