Mazda CX-5 Service & Repair Manual: Engine Front Cover
Purpose, Function
-
The engine front cover covers the front of the engine to prevent engine oil spillage, noise leakage, and foreign material penetration.
Construction
-
The engine front cover is installed to the front of the engine.
-
The lightweight engine front cover is made of aluminum alloy with excellent noise absorption.
-
The engine front cover has the following parts shown in the figure.
Cylinder Block
Purpose, Function
The cylinder block forms the cylinder and crankcase.
Construction
The cylinder block consists of the upper cylinder block and lower cylinder
block.
The ...
Crank, Balancer
...
Other materials:
Headliner Removal/Installation
1. Disconnect the negative battery cable..
2. Remove the following parts:
a. Sunroof seaming welt (with sunroof system).
b. A-pillar trim.
c. Front map light.
d. Sunvisor.
e. Front scuff plate.
f. Rear scuff plate.
g. B-pillar lower trim.
h. Adjust anchor cover.
i. Upper anchor i ...
Brake Hose (Front) Removal/Installation
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
3. After installation, add brake fluid, bleed the air, and inspect for fluid
leakage..
1
Brake pipe
2
Clip
3
Bolt
...
Tire Pressure Monitoring System (TPMS)
Purpose, Outline
The tire pressure monitoring system monitors the tire pressure of all 4 tires.
If the tire pressure of 1 tire or more becomes excessively low, the driver is
notified.
A tire pressure monitoring system has been adopted which indirectly inspects
the tire pres ...