Mazda CX-5 Service & Repair Manual: Engine

Starter Relay [Skyactiv G 2.0]

Purpose, Function The starter relay supplies power to the starter by receiving the signal from the PCM. Construction The starter relay is installed to the relay and fuse block. ...

General

...

Other materials:

Rear ABS Wheel Speed Sensor Removal/Installation
1. Remove the trunk board.. 2. Remove the trunk end trim.. 3. Remove the rear scuff plate.. 4. Remove the trunk side trim.. 5. Disconnect the rear ABS wheel-speed sensor connector. 6. Press the rear ABS wheel-speed sensor tabs and press out the sensor toward the outside of the vehicl ...

Lights On Reminder Warning Alarm
Purpose The lights-on reminder warning alarm notifies the driver that the TNS and headlights are not turned off. Function The instrument cluster receives the following vehicle condition signals via the CAN signal from the start stop unit and rear body control module (RBCM). ...

Front Shock Absorber And Coil Spring Disassembly/Assembly
WARNING: Removing/installing the front shock absorber and coil spring is dangerous. The front shock absorber and coil spring could fly off and cause serious injury or death, and damage the vehicle. 1. Remove the front shock absorber and coil spring.. 2. Remove in the order ...