Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Electronic Control Coupling

Mazda CX-5 Service & Repair Manual / Drivetrain / Driveline / 4WD / Electronic Control Coupling

Purpose, Function

Construction


Operation

AWD Solenoid Control Current Is OFF

AWD Solenoid Control Current Is ON

Fail-safe


DTC

Fail-safe

P1887:11

P1887:12

P1887:13

P1887:14

Control disabled.


Coupling Component Removal/Installation
WARNING: When replacing the coupling component, read the special character string before installing a new coupling component and write it to the AWD control module after replacement. The ...

Fuel Gauge Sender Unit Inspection [Awd]
Fuel gauge sender unit (main) NOTE: For the fuel gauge sender unit removal/installation, refer to the fuel pump removal/installation because the fuel gauge sender unit is integrated with t ...

Other materials:

Tire Labeling
Federal law requires tire manufacturers to place standardized information on the sidewall of all tires. This information identifies and describes the fundamental characteristics of the tire and also provides a tire identification number for safety standard certification and in case of a recall ...

Washer Fluid Level Sensor Inspection
1. Disconnect the negative battery cable.. 2. Set the front over fender aside.. 3. Set the mudguard (RH) aside.. 4. Remove the front bumper.. 5. Inspect for continuity according to washer fluid level between the washer fluid-level sensor terminals. If not as indicated in th ...

Key Warning Light (Red)/Key Indicator Light (Green)
Purpose KEY warning light (red) The KEY warning indicator light (red) notifies the user that the engine cannot be started, the remote transmitter is outside of the vehicle, or that there is a malfunction in the system. KEY indicator light (green) The KEY indicator light (g ...

© 2016-2022 Copyright www.mcx5.org