Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: DSC Control

Outline

Roll over mitigation (ROM) outline

Function

Vehicle condition determination


Oversteer tendency determination

Understeer tendency determination

Construction

Block diagram


Operation

Oversteer tendency suppression


Understeer tendency suppression


Roll over mitigation (ROM) operation

General Information
...

DSC HU/CM
Outline A high reliability, reduced size and weight DSC HU/CM, integrating both the DSC HU and the DSC CM, has been adopted. DSC HU Part Purpose/Function According to DSC ...

Other materials:

Cooling Fan Relay [Skyactiv G 2.0]
Purpose, Function The cooling fan relay operates by receiving the signal from the PCM to supply power to the cooling fan motor. Construction The cooling fan relay is installed on the relay and fuse block. Operation The contact point is on when the battery vo ...

Push-Starting
Do not push-start your Mazda. WARNING Never tow a vehicle to start it: Towing a vehicle to start it is dangerous. The vehicle being towed could surge forward when its engine starts, causing the two vehicles to collide. The occupants could be injured. CAUTION Do not push-start a vehicle that ...

Heated Oxygen Sensor (HO2 S) Heater Control
Outline Based on the control of the HO2S heater, a stabilized oxygen concentration is detected even at low exhaust temperatures, and feedback control of fuel injection even at cold engine start is made possible for improved cold temperature exhaust emission performance. Both ...

© 2016-2022 Copyright www.mcx5.org