Chevrolet Spark manuals

Mazda CX-5 Owners Manual: Driving on Uneven Road

Your vehicle's suspension and underbody can be damaged if driven on rough/uneven roads or over speed bumps at excessive speeds. Use care and reduce speed when traveling on rough/uneven roads or over speed bumps.

Use care not to damage the vehicle's underbody, bumpers or muffler(s) when driving under the following conditions:

Ascending or descending a slope with a sharp transition angle Ascending or descending a driveway or trailer ramp with a sharp transition angle


Your vehicle is equipped with low profile tires allowing class-leading performance and handling. As a result, the sidewall of the tires are very thin and the tires and wheels can be damaged if driven through potholes or on rough/uneven roads at excessive speeds. Use care and reduce speed when traveling on rough/uneven roads or through potholes.

Overloading
WARNING Be careful not to overload your vehicle: The gross axle weight rating (GAWR) and the gross vehicle weight rating (GVWR) of your vehicle are on the Motor Vehicle Safety Standard Label on th ...

Towing
Trailer Towing (U.S.A. and Canada) Your Mazda was designed and built primarily to carry passengers and cargo. If you tow a trailer, follow these instructions because driver and passenger safety de ...

Other materials:

Engine Mount Disassembly/Assembly
No.1 Engine Mount (2WD) 1. Remove the front under cover No.2.. 2. Remove in the order indicated in the table. 3. Install in the reverse order of removal. 1 No.1 engine mount rubber (See No.1 engine mount rubber removal note (2WD).) (See No.1 engine mount inst ...

Evaporator
Purpose The evaporator cools the passing air. Function The evaporator vaporizes the atomized refrigerant flowing internally, and the air passing through the evaporator is cooled by the release of latent heat. The moisture in the air is condensed at this time and dehumidifie ...

Manual Transaxle Shift Mechanism Removal/Installation [C66 M R]
1. Disconnect the negative battery cable.. 2. Remove the shift lever using the following procedure: a. Remove the upper panel.. b. Remove the shift lever knob. c. Remove the shift panel.. d. Remove the side wall.. e. Remove the rear console.. f. Press the tabs on the control cable ...

© 2016-2022 Copyright www.mcx5.org