Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Driveshafts

Roof Carrier Bracket Removal/Installation
1. Disconnect the negative battery cable.. 2. Remove the following parts: a. Sunroof seaming welt (with sunroof system). b. A-pillar trim. c. Front map light. d. Sunvisor. e. Front scuff p ...

Front Drive Shaft
Purpose, Function A bell joint has been adopted for the wheel-side constant velocity joint, reducing vibration and noise. A tripod joint have been adopted for the differential side c ...

Other materials:

Power Metal Oxide Semiconductor Field Effect Transistor (Power Mos Fet) Removal/Installation [Full Auto Air Conditioner]
NOTE: When removing the power MOS FET, perform the procedure in the posture shown in the figure. 1. Disconnect the negative battery cable.. 2. Remove the dashboard under cover.. 3. Disconnect the connector. 4. Rotate the power MOS FET (2) while pressing the tab (1). ...

Propeller Shaft On Vehicle Inspection
Joint Area Excessive Play Inspection 1. Shake the universal joint by hand and verify that there is no excessive play. 2. If there is any excessive play, replace the propeller shaft.. Propeller Shaft Runout Inspection CAUTION: Do not rotate the propeller shaft using engine force wh ...

Blower Motor [Manual Air Conditioner]
Purpose The blower motor sends airflow into the cabin. Function The blower motor rotates the blower fan to create airflow and sends out the airflow in the blower unit and A/C unit. Construction The blower motor is installed to the blower unit. The bl ...

© 2016-2024 Copyright www.mcx5.org