Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Door Ajar Warning Light

Purpose

Function

Construction

Operation

1. The instrument cluster receives (1) the door latch switch ON signal or liftgate latch switch ON signal from the rear body control module (RBCM).

2. The instrument cluster microcomputer turns the transistor on (2) based on each signal.

3. When the transistor turns on, a ground circuit with the door-ajar warning light is established and the door-ajar warning light illuminates (3).


Fail-safe

Door Adjustment
1. Measure the gap and height difference between the door and the body. 2. Loosen the door hinge installation bolts and adjust the door. Standard clearance a: 2.8?3.8 mm {0.12?0.14 in} ...

Door Module Panel
Purpose, Function Styrofoam door module panels have been adopted for reducing vehicle weight. Construction Styrofoam is applied to the door module panels (shaded areas) durin ...

Other materials:

Front Heat Duct Removal/Installation
1. Disconnect the negative battery cable.. 2. Remove the following parts: a. Dashboard under cover. b. Side wall. c. Glove compartment. 3. Detach the tab and remove the front heat duct. LH RH 4. Install in the reverse order of removal. ...

Seat Track Position Sensor [Two Step Deployment Control System]
Purpose The seat track position sensor detects the front and back positions of the driver seat. Function The seat track position sensor converts the seat position into an electrical signal and sends it to the SAS control module. Construction The seat track posi ...

Fuel Line Pressure Inspection
WARNING: Fuel line spills and leakage from the pressurized fuel system are dangerous. Fuel can ignite and cause serious injury or death and damage. To prevent this, complete the following inspection with the engine stopped. Fuel is very flammable liquid. If fuel spills or leaks ...

© 2016-2022 Copyright www.mcx5.org