WARNING:
Hot differential oil may cause severe burns. Do not perform maintenance while differential oil is hot.
1. Disconnect the negative battery cable.
2. Disconnect the differential oil temperature sensor connector.
3. Remove the differential oil temperature sensor.
4. Install the differential oil temperature sensor.
13—17 N·m {133—173 kgf·cm, 116—150 in·lbf}
5. Connect the differential oil temperature sensor connector.
6. Connect the negative battery cable..
Generator [Skyactiv G 2.0]
Purpose, Function
The generator operates by obtaining drive force from the engine via the drive
belt and generates the required electricity for electronic devices.
Construction
The generator is installed on the engine left front side.
Output control is perfor ...
Car Navigation Unit Removal/Installation
CAUTION:
The audio unit communicates with the car-navigation unit and records the
presence/non-presence of the car-navigation unit when the ignition is switched
to ACC or ON (engine off or on) after connecting the negative battery cable.
If the commander switch is installed ...
Oil Seal (Coupling Component) Replacement
1. Drain the differential oil into a container.
2. Remove the coupling component..
3. Remove the oil seal from the differential carrier using a screwdriver or similar
tool.
4. Apply differential oil to the new oil seal lip.
5. Install the new oil seal to the differential carrier using the ...