Mazda CX-5 Service & Repair Manual: Differential Oil Temperature Sensor Inspection
WARNING:
-
Hot differential oil may cause severe burns. Do not perform maintenance while differential oil is hot.
1. Disconnect the negative battery cable.
2. Disconnect the differential oil temperature sensor connector and remove the differential oil temperature sensor.
3. Wrap the differential oil temperature sensor with plastic wrap and immerse it into a beaker filled with water. Gradually raise the water temperature, and measure resistance between differential oil temperature sensor terminals A and B.
-
If not as specified, inspect the harness for continuity. If there is normal continuity between the terminals, replace the differential oil temperature sensor.
|
Water temperature (°C {°F}) |
Resistance (kilohm) |
|
0 {32} |
91—100 |
|
10 {50} |
56—61 |
|
20 {68} |
35—39 |
|
30 {86} |
23—25 |
|
40 {104} |
15—16 |
|
50 {122} |
10—11 |
|
60 {140} |
7.1—7.9 |
|
70 {158} |
5.0—5.6 |
|
80 {176} |
3.6—4.0 |
4. Install the differential oil temperature sensor and connect the connector.
5. Connect the negative battery cable..
Differential Oil Temperature Sensor
Purpose, Function
The differential oil temperature sensor detects the rear differential oil
temperature based on the resistance of the thermistor, and inputs it to the
AWD CM.
Const ...
Differential Oil Temperature Sensor Removal/Installation
WARNING:
Hot differential oil may cause severe burns. Do not perform maintenance while
differential oil is hot.
1. Disconnect the negative battery cable.
2. Disconnect the different ...
Other materials:
Headlight High Beam Indicator Light
Purpose
Notifies the user that the headlights (HI) are illuminated.
Function
Illuminates when the headlight (HI) or parking illumination conditions are
met.
Construction
Displayed in the instrument cluster.
Operation
1. When the light switch is operat ...
Essential Information
Introduction
Be extremely careful and prevent injury to yourself and others or damage to your
vehicle when using this manual for inspection and maintenance.
If you are unsure about any procedure it describes, we strongly urge you to have
a reliable and qualified service shop perform the work ...
Shift And Select Mechanism [C66 M R]
Purpose, Function
The shift and select mechanism moves the shift fork to change gears according
to the operation of the shift lever in the cabin.
Construction
Shift control module
The moving parts of the shift control module are vertically positioned..
In th ...
