Mazda CX-5 Service & Repair Manual: Crankshaft Pulley
Purpose, Function
-
The crankshaft pulley transmits the drive force to the auxiliary parts via the drive belt.
-
The crankshaft pulley suppresses torsional vibration of the crankshaft.
Construction
-
The crankshaft pulley is installed to the front of the crankshaft.
-
The crankshaft pulley has a torsional damper for suppressing torsional vibration of the crankshaft.
-
The crankshaft pulley has key groove to match the timing to the crankshaft.
-
The crankshaft pulley has a timing mark indicating the piston position.
Drive Belt Auto Tensioner Inspection
WARNING:
A hot engine can cause severe burns. Turn off the engine and wait until it
is cool before servicing.
CAUTION:
If the rubber part of the drive belt auto tensioner is d ...
Other materials:
Washer Fluid
InspectingWasher Fluid Level
WARNING
Use only windshield washer fluid or plain water in the reservoir:
Using radiator antifreeze as washer fluid is dangerous. If sprayed on the windshield,
it will dirty the windshield, affect your visibility, and could result in an accident.
Using Washer Fluid ...
Presilencer
Purpose, Function
Reduces the exhaust noise.
Construction
The presilencer is installed to the rear of the TWC.
2WD
AWD
The presilencer consists of the filters, stuffing and wool-stainless.
2WD
AWD
...
Shroud Side Member Removal [Panel Replacement]
Symbol Mark
Removal Procedure
1. Drill the 3 locations indicated by (A) shown in the figure.
2. Drill the 8 locations indicated by (B) and 2 locations indicated by (C) shown
in the figure.
NOTE:
When drilling the 3 locations indicated by (A) and 2 locations indicated
by (C) sh ...