Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Crankshaft Position (CKP) Sensor

Mazda CX-5 Service & Repair Manual / Engine / Control / Crankshaft Position (CKP) Sensor

Purpose/Function

Construction

Operation

CKP sensor characteristic


Fail-safe


DTC No.

Fail-safe function

P0335:00

  • Stops the fuel injection.

  • Stops the ignition.


Crankshaft Position (CKP) Sensor Removal/Installation
CAUTION: When foreign material such as an iron chip is on the CKP sensor, it can cause abnormal output from the sensor because of flux turbulence and adversely affect the engine control. ...

Engine Coolant Temperature (ECT) Sensor Inspection
Resistance Inspection WARNING: When the engine is hot, it can badly burn. Turn off the engine and wait until it is cool before removing the ECT sensor. ECT Sensor No.1 1. Remove the ...

Other materials:

Corner Junction Installation [Panel Replacement]
Symbol Mark Installation Procedure 1. When installing new parts, measure and adjust the body as necessary to conform with standard dimensions. 2. Drill holes for the plug welding before installing the new parts. 3. After temporarily installing new parts, make sure the related parts fit p ...

Fuel Pump Control Module Inspection
1. Perform the KOEO self-test.. 2. Verify that a fuel pump control module related DTC is detected.. If DTCs are detected, repair the malfunctioning part according to the applicable DTC troubleshooting.. If a DTC is not detected, go to the next step. 3. Inspect the followin ...

Buckle Switch Inspection
Driver-side 1. Switch the ignition to off. 2. Disconnect the negative battery cable and wait for 1 min or more.. 3. Remove the front seat.. 4. Remove the front buckle.. 5. Inspect for continuity between the buckle switch terminals using a tester. If not as indicated in the tab ...

© 2016-2022 Copyright www.mcx5.org