Mazda CX-5 Service & Repair Manual: Clutch Pedal Position (CPP) Switch [Skyactiv G 2.0]
Purpose/Function
-
Detects the connection status of the clutch.
Construction
-
Installed on the clutch pedal.
-
An ON/OFF type switch has been adopted.
Operation
-
Inputs the CPP switch on/off signal to the PCM.
-
The contact point is on and voltage is output when the clutch pedal is engaged, and off when the clutch pedal is not engaged.
Fail-safe
-
Function not equipped.
Clutch Pedal Position (CPP) Switch Inspection [Skyactiv G 2.0]
Continuity Inspection
1. Verify that the CPP switch is installed properly..
2. Disconnect the negative battery cable..
3. Disconnect the CPP switch connector.
4. Verify that the continuity betw ...
Clutch Pedal Position Switch Removal/Installation [C66 M R]
1. Disconnect the negative battery cable..
2. Disconnect the clutch pedal position switch connector.
3. Rotate the clutch pedal position switch 45° counterclockwise.
4. Remove the clutch pe ...
Other materials:
Advanced Keyless Entry System
WARNING
Radio waves from the key may affect medical devices such as pacemakers: Before
using the key near people who use medical devices, ask the medical device manufacturer
or your physician if radio waves from the key will affect the device.
The advanced keyless function allows you to lock/u ...
Shift Lock System Inspection
Shift-Lock System Inspection
1. Switch the ignition ON (engine off).
2. Shift the selector lever to the P position.
3. Verify that the selector lever cannot be shifted from P to R position when
the brake pedal is released.
If it can be verified, go to the next step.
If not as ...
Rear Seat Belt Removal/Installation
CAUTION:
The ELR (emergency locking retractor) has a spring that will unwind if the
retractor cover is removed. The spring cannot be rewound by hand. If this occurs,
the ELR will not work properly. Therefore, do not disassemble the retractor.
1. Remove the following parts:
a. T ...
