Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Check Valve Removal/Installation

Mazda CX-5 Service & Repair Manual / Engine / Emissions / Check Valve Removal/Installation

Except U.S.A. And CANADA

1. Remove the floor under cover..

2. Remove in the order indicated in the table.



1

Evaporative hose

2

Check valve


3. Install in the reverse order of removal.

Check Valve Inspection
Except U.S.A. And CANADA 1. Remove the check valve.. 2. Verify that there is no airflow when positive pressure is applied to port A. If there is airflow, replace the check valve.. ...

Check Valve
Except U.S.A. And CANADA Purpose, function The check valve maintain the pressure in the fuel tank at constant pressure. Construction The check valve is installed to the side of th ...

Other materials:

Evaporator Temperature Sensor Inspection [Full Auto Air Conditioner]
NOTE: Inspect the evaporator temperature sensor when it is installed to the A/C unit. 1. Set the fan speed at MAX HI. 2. Set the temperature control at MAX COLD. 3. Set the RECIRCULATE mode. 4. Turn the A/C switch off. 5. Close all doors and windows. 6. Wait for 5 min. 7 ...

Fuse Block
Purpose Fuses used by each system are grouped and housed together for smooth inspection and replacement servicing. Function Fuses used by each system are grouped and housed together. Construction Installed inside the front side trim (LH). Operation Fu ...

Supplier Identification Procedure [Audio]
NOTE: The unit supplier can vary. When asking the supplier (service center) for repair or replacement, identify the supplier and fill in the Audio Repair Order Form using the following procedures. Verification procedure using label or inscribed lettering 1. Disconnect the negati ...

© 2016-2022 Copyright www.mcx5.org