Chevrolet Spark manuals

Mazda CX-5 Owners Manual: Center-Rear Position Seat Belt

Before using the center-rear lap/shoulder belt make sure tongue (A) and anchor buckle (B) are fastened.


Fastening the Seat Belt

1. Grasp the seat belt tongue (C).

2. Slowly pull out the lap/shoulder belt.

3. Insert the seat belt tongue (C) into the seat belt buckle (D) until you hear a click sound.


WARNING

Fastening the Center-Rear Seat Belt with Only One Buckle: Fastening the center-rear seat belt with only one buckle is dangerous. If only one pair of seat belt tongues and buckles is fastened (either seat belt tongue (C) and seat belt anchor buckle (D) or seat belt tongue (A) and seat belt buckle (B)), then the seat belt cannot provide full protection. In a sudden stop or collision, the user could slide under the belt and suffer serious injuries. Always make sure that both pairs of seat belt tongues and buckles are fastened properly.

Front Seat Belt Pretensioner and Load Limiting Systems
For optimum protection, the driver and front passenger seat belts are equipped with pretensioner and load limiting systems. For both these systems to work properly you must wear the seat belt prop ...

Seat Belt Extender
If your seat belt is not long enough, even when fully extended, a seat belt extender may be available to you at no charge from your Authorized Mazda Dealer. This extender will be only for you and f ...

Other materials:

Power Metal Oxide Semiconductor Field Effect Transistor (Power Mos Fet) [Full Auto Air Conditioner]
Purpose The power MOS FET controls the blower motor rotation speed. Function The power MOS FET controls the supply voltage to the blower motor based on the gate voltage sent from the climate control unit, and adjusts the fan rotation speed (airflow volume). Constructi ...

Rear Brake (Disc) Removal/Installation
1. Loosen the adjusting nut.. 2. Remove in the order indicated in the table. 3. Install in the reverse order of removal. 4. After installation, add brake fluid, bleed the air, and inspect for fluid leakage.. 5. Pump the brake pedal a few times and inspect the following: The disc pa ...

Evaporative Emission (Evap) Control System
Purpose, Outline Prevents release of evaporative gas into the atmosphere. The intake manifold vacuum introduces evaporative gas to the intake manifold via the charcoal canister and the purge solenoid valve. System Diagram U.S.A. and CANADA Except U.S.A. and CANADA ...

© 2016-2022 Copyright www.mcx5.org