Purpose/Function
An intrusion-minimizing brake pedal has been adopted to the brake pedal to provide for a measure of safety in the event of an accident.
The intrusion-minimizing brake pedal mechanism reduces impact to the lower extremities of the driver by minimizing the amount of rearward brake pedal thrust in a frontal collision.
Construction
The intrusion minimizing brake pedal mechanism is structured on the brake pedal and consists of the following parts.
Pedal arm
Lever
Pin A
Pin B
Pin C
Bracket
Operation
During normal braking
When the brake pedal is depressed, the pedal arm rotates at the pin A fulcrum point, and the pedal depression force is transmitted to the fork of the power brake unit.
This pedal depression force pushes in the fork to operate the brakes.
Intrusion-minimizing operation
In a frontal collision, the brake pedal is forced rearward by the movement of the dashboard.
In response to this, force in the direction of X is applied to the brake pedal lever because the dashboard member and brake pedal lever interfere.
With the addition of force in the direction of X, pin C releases from the lever, and the lever rotates around the pin B fulcrum point.
When the lever rotates, it obstructs pin A at the fulcrum point of the pedal arm.
If the pedal rotates further, pin A separates from the bracket (notch), and the pedal is freed.
By freeing the pedal arm, the force applied to the lower extremities is reduced.
Planetary Gear [Fw6 A EL, Fw6 Ax EL]
Purpose/Function
The planetary gear is a mechanism which shifts the drive force from the engine.
The planetary gear consists of multiple gears which rotate individually while
revolving. By controlling the individual rotation and revolving of the gears,
the transaxle performs gear shi ...
Exhaust Gas Purification System
Purpose, Outline
Purifies contaminants (HC, CO, NOx) in the exhaust gas by utilizing the chemical
reactions of the three-way catalytic converter.
System Diagram
Structure
The exhaust gas purification system consists of the following parts:
Par ...
Front Body Control Module (Fbcm) Configuration (Using As Built Data)
NOTE:
If the configuration is performed using As-Built data, the set value of the
personalization function is reset to the initial value (condition when shipped
from factory). Verify the set value with the customer and perform the personalization
function setting after performing th ...