Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Body Panel

Outline

Structure View


Construction

Triple H-shaped structure


Crushable structure


Ring structure


Multi-load path

Fail-safe

Aerodynamic
Purpose/Function For improved aerodynamics, under covers are installed to the under-surface of the vehicle. Construction The vehicle is equipped with the following (3) under cov ...

Bumper Bracket Installation [Panel Replacement]
Symbol Mark Installation Procedure 1. When installing new parts, measure and adjust the body as necessary to conform with standard dimensions. 2. Drill holes for the plug welding 6 locations ...

Other materials:

Auxiliary Jack/Usb Port Removal/Installation
1. Disconnect the negative battery cable.. 2. Remove the upper console.. 3. While pressing the auxiliary jack/USB port. tabs in the direction of the arrows (1) shown in the figure, press the auxiliary jack/USB port. in the direction of the arrow (2) to detach the auxiliary jack/USB port. tab ...

Steering Switch Removal/Installation
WARNING: Handling the driver-side air bag module improperly can accidentally operate (deploy) the air bag module, which may seriously injure you. Read the service warnings and cautions before handling the air bag module.. 1. Switch the ignition OFF (LOCK). 2. Disconnect the neg ...

Engine Coolant Temperature (ECT) Sensor Removal/Installation
WARNING: When the engine is hot, it can badly burn. Turn off the engine and wait until it is cool before removing the ECT sensor. ECT Sensor No.1 1. Disconnect the negative battery cable.. 2. Remove the plug hole plate.. 3. Drain the engine coolant.. 4. Pull out the evaporati ...

© 2016-2024 Copyright www.mcx5.org