Mazda CX-5 Service & Repair Manual: Awd Control Module

Mazda CX-5 Service & Repair Manual / Drivetrain / Driveline / 4WD / Awd Control Module

Purpose, Function

The AWD CM calculates the optimal amount of torque distribution for the rear wheels and outputs a corresponding electric current to the electronic control coupling (AWD solenoid). This calculation is based on the accelerator pedal angle, four-wheel speed, engine speed, and other related input signals, matched with the vehicle driving and road surface conditions.

Function table


Function name	Contents
AWD system control function	Based on each input signal, the electronic control current sent to the electronic control coupling (AWD solenoid) is optimally controlled.
Diagnostic system	If the self-diagnostic system detects a malfunction, the AWD warning light illuminates to alert the driver, and at the same time the system suspends control or performs other measures to prevent a loss of driving stability and protect the system. The detected malfunction is stored as a DTC in the AWD CM.

Construction

The AWD CM is installed to the right of the dashboard. (Passenger side)

Block Diagram

Fail-safe


DTC	Fail-safe
P164D:00	AWD operates by the specified data.
P182F:00	AWD protection condition (AWD control paused)
P187B:00	Control disabled.
P1886:00	Control disabled.
P188A:00	AWD protection condition (AWD control paused)
U2100:00	AWD operates by the specified data.

All Wheel Drive System

Outline The electronic all-wheel drive (AWD) control system automatically and optimally controls drive torque distribution for the front and rear wheels. Due to this off-road mobility and ...

Awd Control Module Configuration

CAUTION: When performing configuration, it is necessary to read the coupling component calibration data from the AWD control module before replacing it. Connect the M-MDS to the vehicle ...

Other materials:

Transmission/Transaxle Abbreviations
AAS Active Adaptive Shift ABS Antilock Brake System ABDC After Bottom Dead Center ACC Accessories AFS Adaptive Front Lighting System ALC ...

Oil Pump [Fw6 A EL, Fw6 Ax EL]
Purpose/Function The oil pump generates hydraulic pressure in the oil line of the automatic transaxle together with supplying lubrication to powertrain related parts. Construction The oil pump has adopted a gear type with built-in outer and inner rotors. The inner roto ...

Hazardous Driving
WARNING Be extremely careful if it is necessary to downshift on slippery surfaces: Downshifting into lower gear while driving on slippery surfaces is dangerous. The sudden change in tire speed could cause the tires to skid. This could lead to loss of vehicle control and an accident. When driv ...