Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Amenities

Upper Panel Removal/Installation
1. Disconnect the negative battery cable.. 2. Remove the following parts: a. Front console box. b. Shift lever knob (MTX). c. Shift panel. 3. Open the console lid. 4. Remove the button, th ...

Assist Handle Removal/Installation
Removal 1. Insert a tape-wrapped flathead screwdriver into the service hole and remove the assist handle covers. 2. Remove the assist handle in the direction of the arrow (1) and (2), while ...

Other materials:

Flywheel Inspection [C66 M R]
1. Remove the flywheel.. 2. Perform the following procedures to inspect the flywheel. If there is any malfunction or it exceeds the maximum specification, replace the flywheel.. a. Inspect the surface that contacts the clutch disc for scratches, nicks, and discoloration. ...

Vacuum Pump Inspection
1. Pinch open the clamp using pliers and disconnect the vacuum hose from the vacuum pump.. 2. Install the vacuum gauge as shown in the figure, then check the vacuum. 3. Warn up the engine. If the pressure is less than the specification, inspect for the following. Malf ...

Crankshaft Position (CKP) Sensor Inspection
Visual Inspection CAUTION: When foreign material such as an iron chip is on the CKP sensor, it can cause abnormal output from the sensor because of flux turbulence and adversely affect the engine control. Be sure there is no foreign material on the CKP sensor when replacing. ...

© 2016-2022 Copyright www.mcx5.org