Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Air Intake Control [Full Auto Air Conditioner]

Mazda CX-5 Service & Repair Manual / Engine / Intake / Air Intake Control [Full Auto Air Conditioner]

Purpose

Function

Air intake automatic control

1. Calculates the cabin temperature value based on the ambient temperature and sunlight intensity.

2. Compares the calculated cabin temperature value and current cabin temperature.

3. Determines the air intake mode.


Air intake manual control


Air intake mode

REC switch operation

FRESH

Fixed to FRESH when the FRESH switch is turned on during REC mode

REC

Fixed to REC when the RECIRCULATE switch is turned on during FRESH mode


REC mode control under severe heat

Correction

Construction


Input device

Control part

Output device

  • Recirculate switch (climate control unit)

  • Fresh switch (climate control unit)

  • Defroster switch (climate control unit)

  • Ambient temperature sensor

  • Passenger compartment temperature sensor

  • Solar radiation sensor

  • Refrigerant pressure sensor

  • Climate control unit

  • PCM

  • Instrument cluster

  • Air intake actuator

  • Air intake door


Operation

1. The climate control determines the air intake mode based on the operations of the REC, FRESH, defroster switches and signals from each sensor which changes according to the vehicle environment.

2. The climate control unit drives the air intake actuator according to the result of the air intake mode determination and corrections.


Air Intake Actuator [Manual Air Conditioner]
Purpose The air intake actuator moves the air intake door in the blower unit to switch the air intake port. Function The air intake actuator drives the motor based on the signal ...

Intake Air System Removal/Installation
WARNING: A hot engine and intake air system can cause severe burns. Turn off the engine and wait until they are cool before removing the intake air system. 1. Disconnect the negative ...

Other materials:

Rear Wheel Hub Bolt Replacement
1. Remove the brake calliper component and suspend it out of the way using a cable. 2. Remove the disc plate. 3. Remove the wheel hub bolt using the SST as shown in the figure. 4. Place a new wheel hub bolt in the wheel hub. 5. Install the wheel hub by placing a proper sized washer o ...

Electronic Control System Outline [Fw6 A EL, Fw6 Ax EL]
Outline In the electronic control system, the TCM calculates the control content based on signals from each type of sensor and switch to operate output parts such as each solenoid. In consideration of suppressed shift shock, smooth driving, and improved fuel economy, the TCM performs ...

Climate Control Unit Disassembly/Assembly [Manual Air Conditioner]
1. Disassemble in the order indicated in the figure. 1 Dial 2 Airflow mode wire (See Wire Removal Note.) (See Wire Installation Note.) 3 Air mix wire (See Wire Removal Note.) (See Wire Installation Note ...

© 2016-2024 Copyright www.mcx5.org