Mazda CX-5 Service & Repair Manual: Afs Off Indicator Light
Purpose
-
The AFS OFF indicator light notifies the user that the AFS is stopped or a malfunction occurs in the AFS.
Function
-
The AFS OFF indicator light illuminates when the AFS is stopped and flashes when a malfunction occurs in the AFS.
Construction
-
When the microcomputer in the instrument cluster receives a AFS OFF indicator light illumination request, it controls the illumination and flashing of the AFS OFF indicator light based on the received illumination request.
Operation
NOTE:
-
When the ignition is switched ON, the AFS control module illuminates the AFS OFF indicator light for 3 s to check the light bulb and notifies that the AFS OFF indicator light bulb is normal.
-
The AFS control module sends a AFS OFF indicator light illumination/flash request signal to the instrument cluster when a malfunction occurs in the AFS or the AFS is stopped.
-
The instrument cluster illuminates/flashes the AFS OFF indicator light based on the AFS OFF indicator light illumination/flash request signal.
Fail-safe
-
Function not equipped.
Storage
...
Air Bag System Warning Light [Standard Deployment Control System]
Purpose
The air bag system warning light notifies the driver of a malfunction in
the SRS air bag system.
Function
If a malfunction occurs in the SRS air bag system, the air bag ...
Other materials:
Main Fuse
Purpose
If electric current of the specified value or more flows to each fuse, the
fuse melts due to heat generation to protect the systems and parts downstream
of the fuse.
Function
If electric current to each fuse is the specified value or more, the fuse
melts due to h ...
Front Seat Cushion Frame Removal/Installation
WARNING:
Handling a side air bag improperly can accidentally operate (deploy) the
air bag, which may seriously injure you. Read the service warnings/cautions
in the Workshop Manual before handling the front seat (side air bag integrated)..
If the sliding mechanisms on both side ...
Oil Seal (Side Gear) Replacement
1. Remove the drain plug and the drain differential oil into a container.
2. Install a new washer and the drain plug, and tighten.
3. Remove the rear drive shaft..
4. Remove the clip from the drive shaft.
CAUTION:
Wrap the end of a screwdriver with cloth to prevent scratches to the i ...
