Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Afs (Adaptive Front Lighting System) Control Module

Mazda CX-5 Service & Repair Manual / Body / Lighting & Horn / Exterior / Afs (Adaptive Front Lighting System) Control Module

Purpose

Function

Automatic configuration function

On-board diagnostic function

Operation

Fail-safe


DTC No.

Fail-safe function

B1041:14

  • The swivel actuator is moved to the center.

  • The headlight leveling actuator is stopped at the position when the malfunction is determined.

B1041:54

  • The swivel actuator is moved to the center.

  • The headlight leveling actuator is stopped at the position when the malfunction is determined.

B1044:01

  • The swivel actuator is moved to the center.

  • The headlight leveling actuator is stopped at the position when the malfunction is determined.

B10A3:86

  • The swivel actuator (LH) is stopped at the position when the malfunction is determined.

  • The swivel actuator (RH) is moved to the center.

  • Control of the headlight auto leveling system is continued with the headlight leveling actuator positioned -0.6° from where the malfunction is determined.

B10A3:87

  • The swivel actuator (LH) is stopped at the position when the malfunction is determined.

  • The swivel actuator (LH) is moved to the center, or the swivel actuators (LH) and (RH) are moved to the center.

  • Control of the headlight auto leveling system is continued with the headlight leveling actuator positioned -0.6° from where the malfunction is determined.

B10A4:86

  • The swivel actuator (RH) is stopped at the position when the malfunction is determined.

  • The swivel actuator (LH) is moved to the center.

  • Control of the headlight auto leveling system is continued with the headlight leveling actuator positioned -0.6° from where the malfunction is determined.

B10A4:87

  • The swivel actuator (RH) is stopped at the position when the malfunction is determined.

  • The swivel actuator (RH) is moved to the center, or the swivel actuators (LH) and (RH) are moved to the center.

  • Control of the headlight auto leveling system is continued with the headlight leveling actuator positioned -0.6° from where the malfunction is determined.

C0051:86

  • The swivel actuator is moved to the center.

  • Control of the headlight auto leveling system is continued.

U0001:88

  • The swivel actuator is moved to the center.

  • The headlight leveling actuator is stopped at the position when the malfunction is determined.

U0100:00

  • The swivel actuator is moved to the center.

  • The headlight leveling actuator is stopped at the position when the malfunction is determined.

U0131:00

  • The swivel actuator is moved to the center.

  • Control of the headlight auto leveling system is continued.

U0140:00

  • The swivel actuator is moved to the center.

  • The headlight leveling actuator is stopped at the position when the malfunction is determined.

U0155:00

  • The swivel actuator is moved to the center.

  • Control of the headlight auto leveling system is continued.

U0320:09

  • The swivel actuator is moved to the center.

  • Control of the headlight auto leveling system is continued.

U0420:68

  • The swivel actuator is moved to the center.

  • Control of the headlight auto leveling system is continued.

U0423:68

  • AFS OFF switch error signal

    • Control of the swivel actuator is continued with the AFS OFF switch fixed in the condition when the malfunction is detected.

    • Control of the headlight auto leveling system is continued.

  • Ignition switch error signal

    • Control of the AFS is continued with the ignition switched ON (engine on).

    • Control of the headlight auto leveling system is continued.

  • Selector lever position (R position) (ATX)/Reverse (MTX) signal error

    • The swivel actuator is moved to the center.

    • Control of the headlight auto leveling system is continued.

  • Selector lever position (R position) (ATX)/Reverse (MTX) signal not determined

    • Control of the swivel actuator is continued with the transaxle range sensor (ATX)/back-up light switch (MTX) fixed in the condition when the malfunction is determined.

    • Control of the headlight auto leveling system is continued.

U2005:86

  • The swivel actuator is moved to the center.

  • The headlight leveling actuator is stopped at the position when the malfunction is determined.

U2300:54

  • Control of the AFS is continued.

  • Control of the headlight auto leveling system is continued.

U2300:55

  • The swivel actuator is moved to the center.

  • The headlight leveling actuator is stopped at the position when the malfunction is determined.

U2300:56

  • Control of the AFS is continued.

  • Control of the headlight auto leveling system is continued.

U3000:42

  • The swivel actuator is moved to the center.

  • The headlight leveling actuator is stopped at the position when the malfunction is determined.

U3000:49

  • RAM/ROM malfunction

    • The swivel actuator is moved to the center.

    • The headlight leveling actuator is stopped at the position when the malfunction is determined.

  • AFS function malfunction

    • Not applicable

  • CAN hardware malfunction

    • The swivel actuator is moved to the center.

    • The headlight leveling actuator is stopped at the position when the malfunction is determined.

U3003:16

  • The swivel actuator is stopped at the position when the malfunction is determined.

  • The headlight leveling actuator is stopped at the position when the malfunction is determined.

U3003:17

  • The swivel actuator is stopped at the position when the malfunction is determined.

  • The headlight leveling actuator is stopped at the position when the malfunction is determined.


Afs (Adaptive Front Lighting System)
Outline The AFS is a system which enhances the range of visibility when the headlights are turned on by pointing the optical axis of the headlights in the direction in which the vehicle i ...

Back Up Light Bulb Removal/Installation
1. Disconnect the negative battery cable.. 2. Insert a tape-wrapped flathead screwdriver into the service hole in the position shown in the figure. 3. Move the flathead screwdriver in the di ...

Other materials:

Rear Seat Back Striker Removal/Installation
1. Disconnect the negative battery cable.. 2. Press the push knob to fold the rear seat back. 3. Remove the following parts: a. Trunk board. b. Trunk end trim. c. Rear scuff plate. d. Trunk side trim. 4. Remove the bolts. 5. Remove the rear seat back striker. 6. Install in the ...

Fuel Pressure Sensor Inspection
Voltage Inspection NOTE: The fuel pressure sensor cannot be removed as a single unit. When replacing the fuel pressure sensor, replace it together with the fuel distributor as a single unit. 1. Connect the M-MDS to the DLC?2. 2. Switch the ignition ON (engine off or on). 3. ...

Transfer Removal/Installation [Fw6 Ax EL]
CAUTION: Performing the following procedures without first removing the front ABS wheel-speed sensor may possibly cause an open circuit in the harness if it is pulled by mistake. Before performing the following procedures, disconnect the front ABS wheel-speed sensor (axle side) and ...

© 2016-2022 Copyright www.mcx5.org