Purpose
By inserting the plug of an electrical device, 12 V (maximum 120 W) of power is supplied enabling use of the electrical device in the vehicle.
Function
Front accessory socket
When the ignition is switched to ACC or ON (engine off or on), 12 V (maximum 120 W) of power is supplied.
Center accessory socket, rear accessory socket
12 V (maximum 120 W) of power is supplied constantly.
Construction
A cap is installed to prevent penetration of foreign matter in the socket such as dust.
A front accessory socket is installed to the front console.
A center accessory socket is installed inside the rear console.
A rear accessory socket is installed to the trunk side trim (RH).
Operation
Front accessory socket
1. When the ignition is switched to ACC or ON (engine on or off), power is supplied constantly.
Center accessory socket, rear accessory socket
1. Power is supplied constantly.
Fail-safe
Function not equipped.
Rear Wiper And Washer Switch Inspection
1. Disconnect the negative battery cable..
2. Remove the following parts:
a. Column cover.
b. Wiper and washer switch.
3. Use a tester to measure and verify that the continuity between the rear wiper
and washer switch terminals is as indicated in the table.
If the continuity is ...
Parking in an Emergency
Parking in an Emergency
The hazard warning lights should always be used when you stop on or near a roadway
in an emergency.
The hazard warning lights warn other drivers that your vehicle is a traffic hazard
and that they must take extreme caution when near it.
Depress the hazard warning fla ...
Lower Cowl Side Reinforcement Installation [Panel Replacement]
Symbol Mark
Installation Procedure
1. When installing new parts, measure and adjust the body as necessary to conform
with standard dimensions.
2. Drill holes for the plug welding before installing the new parts.
3. After temporarily installing new parts, make sure the related parts fit p ...