Chevrolet Spark manuals

Audi A4 (B9) 2016-2022 Owner's Manual: When driving

Starting to drive, stopping, and parking

Starting from a stop

Securing the vehicle against rolling

Secure your vehicle to prevent it from rolling before exiting the vehicle.

If one of these measures is not possible, for example because there is no vehicle power, you must secure your vehicle against rolling using additional measures.

Set the parking brake before selecting the "P" selector lever position. This prevents too much stress from being put on the locking mechanism when parking on a steep surface.

WARNING

Note

If you have to stop on an incline, always press the brake pedal to hold the vehicle in place to reduce the risk of the vehicle rolling backward.

Do not try to hold the vehicle in place by pressing and holding the accelerator pedal.

The transmission can overheat, which increases the risk of damage.

Hill hold assist

If you take your foot off of the brake pedal when driving on hills, the braking force will be held for several seconds. At that time, you can start driving without the vehicle rolling backward.

Requirement: the driver's door must be closed, the engine must be on, and the vehicle must be traveling uphill.

WARNING

Starting the vehicle
Convenience key Applies to: vehicles with convenience key Fig. 94 Center console: starting the engine Requirement: the key must be in the vehicle. Starting the engine Press and hold the brake pedal ...

Gears and driving programs
Fig. 95 Center console: selector lever The automatic transmission shifts automatically depending on the selected gear and the current driving style. When driving with a moderate driving style, upshif ...

Other materials:

Front Door Latch Switch
Purpose, Function Switches on/off in conjunction with the latch lever rotation, and detects the front door open/closed condition by the voltage which is changed by the rear body control module (RBCM). Construction The switch is turned on/off by the rotation of the latch lev ...

Low And Reverse Brake [Fw6 A EL, Fw6 Ax EL]
Purpose/Function The low and reverse brake stops the rotation of the front internal gear and rear planetary carrier while in 1GR and in reverse, locking them to the transaxle case. Construction The low and reverse brake consist of the following parts shown in the figure. ...

Map update
Introduction Applies to: vehicles with navigation system You can update the map data in the MMI with a map update. The functions depend on the country and vehicle equipment. Map update through online map update Import a map update from the USB connection to your MMI Online map update Applies to ...

© 2016-2022 Copyright www.mcx5.org