Chevrolet Spark manuals

Audi A4 (B9) 2016-2022 Owner's Manual: System settings

Introduction

General settings are described in this chapter.

You can find specific settings in the chapters about those settings. The available settings depend on the vehicle equipment.

Date and time

Possible settings:

Measurement units

Applies to: MMI: Select on the home screen: SETTINGS > General > Measurement units.

Possible settings:

Language and keyboard

Language

You can change the languages for the display, navigation announcements, and the voice recognition system.

Sound

Requirement: an audio source must be active.

Possible settings:

Focus

You can optimize the sound distribution for various locations in the vehicle.

3D effect

You can adjust the intensity of the 3D effect.

With the Medium setting, you will hear an optimal 3D effect for all sources.

Announcements and tones

Possible settings:

WARNING

Adjust the volume of the audio system so that signals from outside the vehicle, such as police and fire sirens, can be heard easily at all times.

Tips

The volume is automatically adjusted to a preset level when the MMI is switched on.

Bluetooth

Bluetooth

You can select a setting for visibility of the MMI to other Bluetooth devices. To connect a new Bluetooth device, the Visible setting must be selected.

If Invisible is selected, a Bluetooth connection will only be possible with paired devices.

If Off is selected, no Bluetooth device can be connected.

Bluetooth audio player

When this function is switched on, the profile will load automatically when your Bluetooth audio player is within range.

Bluetooth name

The MMI's Bluetooth name is displayed and can be changed.

Tips

The name of the Wi-Fi hotspot and the Bluetooth name are automatically compared when there are changes.

Factory default settings

Requirement: the ignition must be switched on.

The settings will be reset. The system will restart.

This may take some time.

Tips

Make sure that not only the settings were deleted but also the stored data, if applicable.

Additional settings
...

Software update
Introduction Applies to: vehicles with software update You can update your vehicle's software. The functions depend on the country and vehicle equipment: Update through the online system update Map ...

Other materials:

Knock Sensor (Ks)
Purpose/Function Detects abnormal combustion in the cylinder as basic information for mainly determining the ignition timing. Detects abnormal combustion in the combustion chamber and inputs it to the PCM as a knocking signal. Construction Installed on the cylinder ...

Automatic Transaxle Removal/Installation [Fw6 A EL]
CAUTION: Performing the following procedures without first removing the front ABS wheel-speed sensor may possibly cause an open circuit in the harness if it is pulled by mistake. Before performing the following procedures, disconnect the front ABS wheel-speed sensor (axle side) and ...

Front Seat Cushion Frame Removal/Installation
WARNING: Handling a side air bag improperly can accidentally operate (deploy) the air bag, which may seriously injure you. Read the service warnings/cautions in the Workshop Manual before handling the front seat (side air bag integrated).. If the sliding mechanisms on both side ...

© 2016-2022 Copyright www.mcx5.org