Chevrolet Spark manuals

Audi A4 (B9) 2016-2022 Owner's Manual: Rearview camera and peripheral cameras

Introduction

Applies to: vehicles with rearview camera/peripheral cameras

Parking and maneuvering
Fig. 126 Orientation line display when parking

Depending on the vehicle equipment, a rearview camera or multiple peripheral cameras may be available.

The rearview camera helps you to park or maneuver using the orientation lines.

The peripheral cameras expand the vehicle overview to include various views around the vehicle that can be selected.

WARNING

Observe the safety precautions and note the limits of the assist systems, sensors, and cameras.

Activating and deactivating

Applies to: vehicles with rearview camera/peripheral cameras

Parking and maneuvering
Fig. 127 Center console: parking aid button

Activating and deactivating

The system can be activated at low speeds, such when maneuvering.

Automatic activation

The system activates automatically when reverse gear is engaged while the engine is running.

Automatic deactivation

The system will deactivate automatically once the vehicle exceeds a certain speed while driving forward.

WARNING

Observe the safety precautions and note the limits of the assist systems, sensors, and cameras.

Clean rearview camera

Applies to: vehicles with rearview camera/peripheral cameras

Depending on vehicle equipment, you may be able to manually initiate rear view camera cleaning.

WARNING

Observe the safety precautions and note the limits of the assist systems, sensors, and cameras.

Warnings

Applies to: vehicles with rearview camera/peripheral cameras

Parking and maneuvering
Fig. 128 Center display: aiming at a parking spot

When parking with the rearview camera or peripheral camera, the parking aid audio and visual warnings will also assist you.

Visual orientation lines

  1. The orange orientation lines show the vehicle's direction of travel. Turn the steering wheel until the orange orientation lines align with the parking space.
  2. You can use the horizontal blue markings to help you estimate the distance to an obstacle.

    Each marking represents approximately 3 feet (1 meter). The blue surface is a static display and represents an extension of the vehicle perimeter to the rear.

  3. You can recognize the rear bumper in the lower display.
  4. You should stop driving in reverse when the red orientation line touches the edge of an object, at the latest.

Symbols

Applies to: vehicles with peripheral cameras

If is displayed and the display area represented by that symbol is not available, then the camera on the that side is not available. The power exterior mirrors may have been folded in or a door or the luggage compartment lid may have been opened.

If is displayed, there is a system malfunction and the display area represented by that symbol is not available. The camera is not working in this area.

If one of the symbols continues to be displayed, drive immediately to an authorized Audi dealer or authorized Audi Service Facility to have the malfunction repaired.

WARNING

Note

Parking aid plus
Activating and deactivating Applies to: vehicles with parking aid plus Fig. 124 Center console: parking aid button General information The parking aid assists when parking and maneuvering by providin ...

Operating the peripheral cameras
Applies to: vehicles with peripheral cameras Fig. 129 Center display: peripheral cameras On vehicles with peripheral cameras, you can select among different views. Selecting the views To display th ...

Other materials:

Turning the Engine Off
WARNING Do not stop the engine while the vehicle is moving: Stopping the engine while the vehicle is moving for any reason other than in an emergency is dangerous. Stopping the engine while the vehicle is moving will result in reduced braking ability due to the loss of power braking, which co ...

Pressure Control Solenoid [Fw6 A EL, Fw6 Ax EL]
Purpose/Function The pressure control solenoid adjusts the pressure control solenoid pressure and controls the line pressure based on the control signal from the TCM. Construction The pressure control solenoid is installed to the solenoid control valve body. The pre ...

Keyless Antenna Removal/Installation
With Advanced Keyless Entry System Vehicle interior, front 1. Disconnect the negative battery cable.. 2. Remove the following parts: a. Decoration panel. b. Shift lever knob (MTX). c. Front console box. d. Shift panel. e. Upper panel. f. Rear console. g. Side wall. h. Front conso ...

© 2016-2022 Copyright www.mcx5.org