Chevrolet Spark manuals

Audi A4 (B9) 2016-2022 Owner's Manual: Raising the vehicle

Applies to: vehicles with vehicle jack

Emergency assistance
Fig. 174 Sill panels: markings

Emergency assistance
Fig. 175 Sill: positioning the vehicle jack



Do not lift the vehicle by the sill. Position the vehicle jack only at the designated mounting points on the side sill. Otherwise, your vehicle could be damaged.

Removing and installing a wheel

Emergency assistance
Fig. 176 Wheel: internal hex socket to turn the wheel bolts

Emergency assistance
Fig. 177 Wheel: alignment pin in the top hole

Removing a wheel

Installing a wheel

Read the directions on when installing unidirectional tires.

The wheel bolts must be clean and loosen and tighten easily. Check the contact surfaces for the wheel and hub. Contaminants on these surfaces must be removed before installing the wheel.



When removing or installing the wheel, the rim could hit the brake rotor and damage the rotor. Work carefully and have a second person help you.

Unidirectional tires

A unidirectional tire profile is identified by arrows on the tire sidewall that point in the running direction.

You must always maintain the specified running direction. This is necessary to ensure the tire's optimal performance in regard to adhesion, running noise, and friction, and to reduce the risk of hydroplaning.

To benefit fully from the advantages of the unidirectional tire design, you should replace faulty tires as soon as possible and restore the correct running direction on all of the tires.

Changing a tire
Preparation You must complete the preparation before changing a tire. Read and follow the important safety precautions. Set the parking brake. Select the "P" selector lever position. When towing ...

Reinstall any covers on the wheel bolts that were removed. Store the vehicle tool kit in its designated place. If the removed wheel does not fit in the spare wheel well, store it securely in th ...

Other materials:

Rear Body Straight Line Dimensions (1) [Dimensions]
Point symbol Designation Hole diameter or bolt or nut size mm {in} A Liftgate hinge installation hole ?12 {0.47} B Liftgate stay damper installation hole ?10 {0.39} ...

Door Ajar Warning Light
Purpose The door-ajar warning light notifies the driver that any door or the liftgate is open. Function When the instrument cluster receives any of the following signals sent from the rear body control module (RBCM) via the CAN signal, the door-ajar warning light illumin ...

Head Restraints
Your vehicle is equipped with head restraints on all outboard seats and the rear center seat. The head restraints are intended to help protect you and the passengers from neck injury. WARNING Always drive with the head restraints installed when seats are being used and make sure they are pro ...

© 2016-2022 Copyright