Chevrolet Spark manuals

Audi A4 (B9) 2016-2022 Owner's Manual: Personalization


General information

Applies to: vehicles with personalized user settings

Depending on vehicle equipment and your country, your vehicle may be able to manage various users in the MMI. Each user will be assigned the settings that they last used.

Before you begin driving, you can select a user in the MMI and load personalized Infotainment and vehicle settings.

Possible users in the MMI:

Depending on vehicle equipment, the following options may be used to detect the active user so that the user settings can be loaded automatically before you start driving.

Requirement: the driver's door has been opened.

The detected user must be shown in the MMI.

Confirm the user shown, select another user, or add another user.


It may not be possible to load Infotainment and vehicle settings, or they may only load partially. The driver is always responsible for the Infotainment and vehicle settings in order to reduce the risk of an accident.


User management

Applies to: vehicles with user management

Opening user management

Applies to: MMI

Selecting a user

Applies to: MMI

Adding myAudi users

Applies to: MMI and Audi connect

Requirement: you must have successfully registered at and have created a 4-digit myAudi PIN.

To transfer existing destinations from the MMI to your myAudi account one time, confirm the system prompts with Yes.

You can set a profile pictured for your myAudi user at

Adding a local user

Applies to: MMI

Editing users

Applies to: MMI

Requirement: the user must be selected and that user's settings must be loaded.

Depending on the user type, available options may include the following.

PIN protection: when this function is switched on, the 4-digit myAudi PIN must be entered before any settings for this user can be loaded.

Remove the user from the vehicle: the user will only be deleted in the vehicle from the list in the MMI.

Change name: you can change the name of the local user.

Removing users

Applies to: MMI


Key user

Applies to: vehicles with key user management

The vehicle owner must be set as the key user to use some of the specific Audi connect vehicle control services that depend on vehicle equipment.

The key user automatically has remote access authorization.

This remote access authorization is necessary to control certain functions that depend on the equipment, such as Audi connect vehicle control services, through the myAudi app.

Setting the key user

Requirement: a key user must not be set yet.

Managing additional users

Depending on the vehicle equipment, you can grant authorization for additional users to use Audi connect vehicle control services at

Removing the key user

If you remove the key user, all other users that were stored by the key user at and their authorizations will be deleted. It will no longer be possible to use the Audi connect vehicle control services, depending on the vehicle equipment.

Requirement: a key user must be set. The ignition has been switched on with a vehicle key.


Starting and driving

Opening and closing

Other materials:

Adjusting adaptive cruise control
Applies to: vehicles with Audi adaptive cruise control You can adjust the system individually. The settings depend on the vehicle equipment. Applies to: MMI: Select on the home screen: VEHICLE > Driver assistance > Audi adaptive cruise control. Possible settings: Applies to: vehicles with ...

All wheel drive (quattro)
Description Applies to: vehicles with all wheel drive The all-wheel drive system distributes the driving power variably to the front and rear axle to improve the driving characteristics. It works together with selective wheel torque control, which can activate when driving through curves. Applies ...

Liftgate Lower Trim Removal/Installation
1. Remove the following parts: a. Liftgate upper trim. b. Liftgate side trim. c. Liftgate recess. 2. Remove fasteners A. 3. Take the shaded area shown in the figure, and pull the liftgate lower trim in the direction of the arrow in the order of (1), (2), (3), (4) and remove it while ...

© 2016-2022 Copyright