Chevrolet Spark manuals

Audi A4 (B9) 2016-2022 Owner's Manual: Drive system

Braking in

A new vehicle must be broken in within the first 1,000 miles (1,500 km) so that all moving parts work smoothly together, which helps to increase the service life of the engine and other drive components.

Do not drive higher than two-thirds of the maximum permitted engine RPM during the first 600 miles (1,000 km) and do not use full acceleration.

The engine can be increased RPM gradually during the next 300 miles (500 km).

Efficient and environmentally-friendly driving

Your driving style greatly influences the amount of fuel and energy consumed, the environmental impact, and the wear on the motor, brakes, and tires. Note the following information for efficient and environmentally-conscious driving:

Tips

The amount of noise produced by the vehicle can increase significantly when driving with a sporty style. Show respect to others around you and the environment with the way you operate your vehicle, especially at night.

Energy management

Your vehicle is equipped with an intelligent energy management system for distributing electricity.

This significantly improves the starting ability and increases the vehicle battery life.

Tips

Messages

The following messages may appear depending on the vehicle equipment:

Drive system: malfunction! Safely stop vehicle

There is a malfunction in the drive system. The brake booster and the power steering may stop working. Stop the vehicle immediately or as soon as possible and do not continue driving. Secure the vehicle against rolling before exiting the vehicle. Have the problem corrected by an authorized Audi dealer or authorized Audi Service Facility.

Drive system: malfunction! Please contact Service

There is a malfunction in the drive system. Drive slowly to an authorized Audi dealer or authorized Audi Service Facility to have the malfunction corrected.

Manually releasing the parking lock
Fig. 98 Front cup holder: removing the cover Fig. 99 Front cup holder: parking lock emergency release The emergency release is located in the front cup holder under a cover. You will need the screw ...

Start/Stop system
Description Applies to: vehicles with Start/Stop system The Start/Stop system can help increase fuel economy and reduce CO2 emissions. In Start/Stop mode, the engine shuts off automatically when st ...

Other materials:

Tire Pressure Monitoring System Set Switch Inspection
1. Remove the TPMS set switch.. 2. Verify that the resistance between the TPMS set switch terminals B and C is as indicated in the table. If not as indicated in the table, replace the TPMS set switch. TPMS set switch specification Terminal ...

Ignition Coil [Skyactiv G 2.0]
Purpose, Function The ignition coil generates high voltage by electromagnetic induction to discharge the spark plug. Construction The ignition coil is installed to the upper part of the spark plug (direct ignition coil). With the adoption of the direct ignitio ...

Positive Crankcase Ventilation (PCV) Valve Removal/Installation
1. Disconnect the negative battery cable.. 2. Remove the intake manifold.. 3. Remove in the order indicated in the table. 4. Install in the reverse order of removal. 1 PCV hose 2 Oil separator 3 Retainer ( ...

© 2016-2022 Copyright www.mcx5.org