Chevrolet Spark manuals

Audi A4 (B9) 2016-2022 Owner's Manual: Connected devices

Displayed connected devices

Requirement: the vehicle must be stationary and the ignition must be switched on.

Possible menu items:

Audi smartphone interface

You can connect your smartphone to the MMI.

myAudi app

This function is available if the myAudi app is installed on your mobile device and started, and if the mobile device is connected with the vehicle's Wi-Fi hotspot.

Note

Read the information about Audi connect, and be sure to note the connectivity costs section.

Managing connected devices

Requirement: the connected devices menu must be displayed.

Connecting a device

Requirement: Bluetooth visibility must be activated in the MMI and mobile device.

Selecting a connected device

Disconnecting a connected device

Deleting a device

If a device is listed multiple times, it will be deleted from all menu items.

Additional options

Depending on the selected function, additional options may be available.

Requirement: the connected devices menu must be displayed.

Bluetooth profiles

You can switch desired profiles on or off separately in the MMI.

Favorite

To set a paired mobile device as the default phone, activate this function in the MMI.

When the mobile device is in range and the Bluetooth function on the mobile device and in the MMI is switched on, the default phone will be given priority over the other Bluetooth devices and will be connected directly to the MMI.

Legal information

General information

Information on the software licenses can be found online at www.audi.com/softwareinfo.

Multi Media Interface

Subscriptions

Version information

Legal notes

Possible options:

Audi smartphone interface

Applies to: vehicles with Audi smartphone interface

Requirement: a smartphone must be connected to the MMI.

Instrument cluster

Requirement: the vehicle must be stationary and the ignition must be switched on.

Possible options:

Head-up display

Applies to: vehicles with head-up display

Requirement: the vehicle must be stationary and the ignition must be switched on. The head-up display is switched off.

Software update
Introduction Applies to: vehicles with software update You can update your vehicle's software. The functions depend on the country and vehicle equipment: Update through the online system update Map ...

Maintenance and Care
...

Other materials:

Fuel Filler Lid Opener Cable Removal/Installation
1. Disconnect the negative battery cable.. 2. Remove the following parts: a. Front scuff plate (LH). b. Front seat (LH). c. Rear scuff plate. d. B-pillar lower trim (LH). e. Rear seat (4:2:4 split type). f. Rear seat cushion (6:4 split type). g. Rear seat back (6:4 split type). h. ...

Center Roof Antenna
Purpose, Function Converts radio broadcast waves to electric signals and sends the signals to the audio unit. Construction A center roof antenna has been adopted which does not require retraction or removal before going through an automatic car wash machine. The ...

Floor Insulator Removal/Installation
Driver-side 1. Disconnect the negative battery cable.. 2. Remove the following parts: a. Driver-side front scuff plate. b. Driver-side front side trim. c. Decoration panel. d. Shift lever knob (MTX). e. Front console box. f. Shift panel. g. Upper panel. h. Rear console. i. Side ...

© 2016-2022 Copyright www.mcx5.org