Chevrolet Spark manuals

Audi A4 (B9) 2016-2022 Owner's Manual: Audi smartphone interface

Setup

Applies to: vehicles with Audi smartphone interface

You can connect your smartphone to the MMI with a cable or wirelessly* using the Audi smartphone interface. Certain content on your smartphone is adapted in the MMI while driving and can be operated through the MMI.

Connecting smartphones with a cable

Requirement: the vehicle must be stationary and the ignition must be switched on. An iPhone from the 6th generation or newer with lightning connection must have the latest operating system installed or a smartphone with Android Auto app must have Android 5.0 Lollipop or newer installed.

Connecting smartphones wirelessly

Applies to: vehicles with wireless Apple CarPlay/wireless Android Auto

Requirement: the vehicle must be stationary and the ignition must be switched on. An iPhone from the 6th generation or newer with lightning connection must have the latest operating system installed or a smartphone with Android Auto app must have Android 11 or newer installed.

Establishing a wired/wireless* connection

WARNING

Driving requires your complete and undivided attention. As the driver, you have complete responsibility for safety in traffic. Never operate mobile devices while driving, because this in- creases the risk of an accident.

Note

Read the information about Audi connect, and be sure to note the connectivity costs section.

Tips

Troubleshooting

Applies to: vehicles with Audi smartphone interface

The information that follows lists some troubleshooting options. They depend on the equipment.

Troubleshooting

Troubleshooting

Playing media
Media sources The following sources can be selected depending on the vehicle equipment: Alexa USB device Connect external device: you can connect external devices via Bluetooth and use the Blueto ...

Additional settings
...

Other materials:

Rear ABS Wheel Speed Sensor Inspection [2 Wd]
Installation Visual Inspection 1. Inspect the following items: If there is any malfunction, replace the applicable part. a. Excessive play of the ABS wheel-speed sensor b. Deformation of the ABS wheel-speed sensor Clearance Inspection 1. Remove the ABS wheel-speed sensor. 2. M ...

Front Seat
Purpose, Function The front seats are structured to reduce impact force applied to the head of the occupant in a vehicle collision. 8WAY or 6WAY power seats have been adopted on the driver's seat. (with power seat system). A seat warmer system has been adopted on the ...

Vacuum Pump Inspection
1. Pinch open the clamp using pliers and disconnect the vacuum hose from the vacuum pump.. 2. Install the vacuum gauge as shown in the figure, then check the vacuum. 3. Warn up the engine. If the pressure is less than the specification, inspect for the following. Malf ...

© 2016-2022 Copyright www.mcx5.org