Chevrolet Spark manuals

Audi A4 (B9) 2016-2022 Owner's Manual: Audi active lane assist/lane departure warning

Audi A4 (B9) 2016-2022 Owner's Manual / Assist systems / Driver assistance / Audi active lane assist/lane departure warning

General information

Applies to: vehicles with Audi active lane assist

The Audi active lane assist/lane departure warning (called only Audi active lane assist in the vehicle displays and in the information that follows in this Owner's Manual) can detect lane marker lines within the limits of the system. If you are approaching a detected lane marker and it appears likely that you will leave the lane, the system can warn you with corrective steering and a steering wheel vibration, if necessary.

The system functions in the speed range of approximately 40 mph - 155 mph (65 km/h - 250 km/h).

Applies to: vehicles with Audi adaptive cruise control and traffic jam assist

If the conditions are met, traffic jam assist switches on at speeds under approximately 40 mph (65 km/h).

WARNING

Observe the safety precautions and note the limits of the assist systems, sensors, and cameras.

Description

Applies to: vehicles with Audi active lane assist

Driver assistance
Fig. 119 Instrument cluster: driver assistance display

Display and warning

The availability, readiness to provide warnings, and the warnings are indicated with indicator lights. Audi active lane assist is ready to provide warnings if an object is detected on at least one side of the lane where your vehicle is traveling.

Driver assistance

If the system is switched on but is not ready to provide warnings, one of the following systems limits or situations could be the cause:

Steering intervention request

If Audi active lane assist intervenes multiple times when no steering activity is detected, the steering intervention request will provide a warning using audio and visual signals, such as .

Take over the steering and keep your hands on the steering wheel so that you will be ready to steer at any time. The system may no longer be ready to provide warnings after a short time, and it will only become active again later.

If the driver does not take over steering, Audi active lane assist will be switched off.

Behavior when a turn signal is active

Applies to: vehicles with side assist: The system will not warn you if you activate a turn signal before crossing the lane marker line. In this case, it assumes that you are changing lanes intentionally.

Applies to: vehicles with side assist: If the turn signal is activated, Audi active lane assist is ready, and a lane change has been classified as critical by lane assist due to vehicles traveling beside you or due to approaching vehicles, then a noticeable corrective steering movement will occur briefly before exiting the lane. This will attempt to keep your vehicle in the lane.

WARNING

Tips

Switching on or off

Applies to: vehicles with Audi active lane assist

Driver assistance
Fig. 120 Turn signal lever: button for Audi active lane assist

WARNING

Observe the safety precautions and note the limits of the assist systems, sensors, and cameras.

Adjusting Audi active lane assist

Applies to: vehicles with Audi active lane assist

You can adjust Audi active lane assist individually.

The settings depend on the vehicle equipment.

Possible settings:

Tips

Certain settings are automatically stored and assigned to the remote control key being used.

Message

Applies to: vehicles with Audi active lane assist

If or is displayed when there is a malfunction, the active lane assist functions may be unavailable or limited.

A message that indicates the cause and possible solution may appear with some displays. The weather conditions may be too poor or the camera may be covered. Clean the area in front of the camera and try to turn on the systems again later.

If the malfunction remains, drive to an authorized Audi dealer or authorized Audi Service Facility immediately to have the malfunction corrected.

Distance warning
Description Applies to: vehicles with distance warning Applies to: vehicles with adaptive cruise control: Fig. 117 Instrument cluster: display of the current distance Applies to: vehicles with Au ...

Audi pre sense
Function overview Applies to: vehicles with Audi pre sense Within the limits of the system, the Audi pre sense functions can initiate measures in certain driving situations to protect the vehicle occu ...

Other materials:

Crankshaft Position (CKP) Sensor Removal/Installation
CAUTION: When foreign material such as an iron chip is on the CKP sensor, it can cause abnormal output from the sensor because of flux turbulence and adversely affect the engine control. Be sure there is no foreign material on the CKP sensor when replacing. Do not assemble t ...

Control System [Manual Air Conditioner]
Outline Refrigerant pressure sensor adopted in which refrigerant pressure is changed into a linear electric signal and precise information is transmitted. Climate control unit with enlarged operation dials and switches adopted Structural View System Wiring Diagram ...

Headliner
Purpose/Function The headliner is equipped with a shock absorbing pad for driver's head protection during a collision. Construction The front and rear side of the headliner is equipped with a shock absorbing pad with a plastic rib-pad structure. ...

© 2016-2022 Copyright www.mcx5.org