Mazda CX-5 Service & Repair Manual: Side Wall Removal/Installation
1. Pull the side wall in the direction of the arrow in the order of (1), (2) and remove it while detaching hooks A and clip B.
2. Pull the side wall in the direction of the arrow (3) and remove it while detaching the guide C.
CAUTION:
-
If the hooks A and clip B is removed forcefully, guide C may be damaged. Carefully remove hooks A and clip B so as not to damage guide C.
3. Install in the reverse order of removal.
Shift Panel Removal/Installation
ATX
1. Disconnect the negative battery cable..
2. Selector lever to neutral position.
3. Remove the front console box..
4. Take the shaded area shown in the figure, and remove the shift panel i ...
Switch Panel Removal/Installation
1. Disconnect the negative battery cable..
2. Remove the car-navigation unit. (with car-navigation system).
3. Insert your hand from the lower side of the lower panel (without car-navigation
sys ...
Other materials:
Seat Warmer System
Purpose
The seat warmer system warms the front seat cushion and front seat back using
the seat warmer unit.
Function
The seat warmer unit warms the seat cushion and seat back by supplying power
to the built-in filaments.
The seat warmer unit can adjust the tempe ...
Turn And Hazard Indicator Alarm
Purpose
The turn and hazard indicator alarm notifies the driver that a turn light
or the hazard warning lights are flashing.
Function
When the instrument cluster receives the turn signal/hazard warning indicator
light illumination request signal sent from the front body con ...
Barometric Pressure (Baro) Sensor
Purpose/Function
Detects the BARO as basic information for mainly determining the fuel injection
amount.
Detects the BARO and inputs it to the PCM as a BARO signal.
Construction
Built into the PCM.
A piezoelectric element has been adopted for detecting th ...
